Liczymy pasujące modele…
A simplistic track saw deflector compatible with Powertec tracks. Highlightes: 1-piece construction. No more nuts or screws. Friction fit with easy installation/removal. Compatible with track clamps Caveats: Tested only on Powertec…
This model was built with PLA, 15% fill and on its side. This model has a built in retainer, so no screws are needed to attach the retainer.
Recommended parameters PLA/PETG/ABS/ASA(mine was PLA) orientation shown in image Organic/Tree Supports on peg .2mm-.3mm layer height 2-3 perimeters brim 10-20% Cubic/Gyroid/3D Honeycomb infill 3+ bottom/top shells
Adapter that fits the female portion of a 4" sewer and drain Wye fitting to allow connecting a 4" Powertec (or similar) blast gate. Allows using PVC sewer and drain (DWV) for dust collection ducting. Print in PETG, 3 wall loops, and 20%…
Dust Splice Coupler Adapter - from 4" PVC to 4" Dust Hose. As mentioned, this is styled after POWERTEC 70123 O.D. Splice, 4", Black, available here* , yet tweaked/shortened to make it print more quickly than a 1-to-1 mimic would print.…
I use the base plate from YodaKubota and my tracksaw adapter part and used OnShape to put them together for someone that asked! Took me about 10 minutes or so once you learn the basic of this great easy to use program! I recommend PETG…
In an effort to make dust collection easier and faster in my shop, I set a goal to have a quick connect/disconnect setup where I can leave the couplers on my tools, and can simply switch the hose from one tool to the next. After reviewing…
A 4x2x5 Gridfinity holder for my set of eight Powertec ¾" bench dogs. The holes are slightly oblong to allow space for the built in spring retention mechanism without engaging it, which means the fit could be a little loose for other…
Befestigung für eine Powertec 4- oder 5-fach Steckdosenleiste. Version “Links” ist wie auf den Fotos zu sehen, Version “Rechts” wäre für die gegenüberliegende Schreibtischseite. Steckdosenleiste ist auf Norma24 erhältlich: Artikelnummer:…
I made a set of Dude's tracksaw rail caps for my Powertec rails. The caps fit perfectly but unfortunately Powertec did not center their mounting holes which prevents them from being used. This model offsets the rails by 7mm to allow the…
Powertec Universal T Track Nut
This is a custom fitting I designed for my dust collection system. It sleeves inside a Schedule 40 fitting, or sleeve on the outside of a Powertec blast vent. I designed it to sleeve inside of a 45 degree, or T-fitting and thread into the…
Someone I know had a Powertec 4" to 2 1/2" reducer that was too small to fit in their Rockler Dust Right Quick Change handle. Both are "4 inches" but there is a roughly 7mm difference in I.D. and O.D. of the two products. It should be…
Powertec Garden Rattan Quader Pflanzkübel Powertec Garden Rattan Quadrat Pflanzkübel Habe für unsere Terasse diese Pflanzkübel gekauft welche für innen und draußen geeignet sein sollen. wie aber auf den Bildern zu erkennen sind die…
Adapter to use the Kreg KMS7215 Micro-Adjuster with a POWERTEC 71536 Router Table Fence: 1 ¼-20 nut needed: the print is interrupted at 10mm to insert it. Connect the adapter to the fence first, at the left handle, then screw the…
The power switch for my Delta DP350 drill press died mid project. The replacement switch I found was the POWERTEC 71672, which is a bit deeper, narrower and taller. This mounting block allows for the re-use of the old mounting screws. The…
📐 Parallel Guide for POWERTEC / Milwaukee Track Saw Rail This is a single-piece, 3D-printable parallel guide designed to slide into a POWERTEC track saw rail (Milwaukee-compatible, but should work with Festool and Makita). and provide a…
The existing models I found didn't quite fit my device, so I designed this one. It might also be compatible with other similar hair trimmers.
Like the summary says. Powertec rails are considerably wider (19cm) due to the added flexable part near the blade. These are 191mm and they fit like butter. I just used some M5 x 30mm bolts because it's what I had laying around and it was…
This is an adapter for the Elegoo Centauri Carbon which mates to a 2.5inch ducting system. Other folks have covered 3 and 4inch mods but I needed 2.5 specifically. I prefer the 2.5inch ducting as it is a little easier to route than the…
PowerTec Gym end cap "square" : This is an end cap for the wb-ls10 PowerTec Leverage Gym workbench.
Base plate for Powertec 302F toggle clamp. Insert into dog holes. Optionally secure with 5/8"-18 nuts. See related items at https://www.printables.com/@HighDesertHacker/collections/2713891 Print Recommendations PETG. 50+% infill. No…
PowerTec Gym end cap "rectangle" : This is an end cap for the wb-ls10 PowerTec Leverage Gym workbench.
The Powertec-Fly attachment can be tricky to store. I made this storage rack from a leftover superstrut (Unistrut). It's still a work in progress, but it's fully functional. I used a 19 mm box offset wrench to tighten the bolt inside the…
Dimensionally accurate model of the 6" Clear PVC Dust Collection Tube from POWERTEC brand.
Replace to provided exhaust port with a Festool Cleantec compatible one.
The power switch on my Ridgid R4512 table saw stopped working, so I replaced it with the POWERTEC On/Off Switch (71355). This model is the housing/faceplate to replace the original Ridgid power switch housing. The screw holes are larger…
Slip-on dust cover for the 4 inch Powertec dust collection port adapter. Keeps dust and chips from blowing out of the line while the port is in use. this was designed in Tinkercad. This is a slip fit that stays put but pulls off easily
Flexible TPU Gasket for the Powertec dust collection port adapter. Fits into a 4-inch PVC pipe to create a tight seal between the dust shoe and the port. Printed in TPU for a snug compression fit
📐 Parallel Guide for POWERTEC / Milwaukee Track Saw Rail This is a single-piece, 3D-printable parallel guide designed to slide into a POWERTEC track saw rail (Milwaukee-compatible, but should work with Festool and Makita). and provide a…
I use the base plate from YodaKubota and my tracksaw adapter part and used OnShape to put them together for someone that asked! Took me about 10 minutes or so once you learn the basic of this great easy to use program! I recommend PETG…
