Filament Spool Shelf for IKEA Bror
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spool shelf designed to be installed on the IKEA Bror Trolley
- Ocena
- 4,5 / 5
- Polubienia
- 25
- Pobrania
- 52
- Wydruki
- 2
- Wyświetlenia
- 1017
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a spool shelf designed to be installed on the IKEA Bror Trolley. It uses the extra hole where a Bror shelf could be placed for the top layer, and requires drilling extra holes for the bottom layer.
Alternatively you could just leave out the second Bror shelf, but no idea how that impacts the stability of the trolley. I chose to add new holes below the lowest holes to move the second Bror shelf there.
It stores 11-12 1kg spools per layer and side, so 44-48 spools in total.
The spool shelf could also work for the Work Bench and other Bror furniture, but I didn't test it.
Additionally required material
- 4x2 18mm bars, 83,5 cm length
- 8x M6x20 screws + washers + nuts