1 / 3
Wire Duct for 1010 or 2020 series t-slot extrusion (Vase Mode) — zdjęcie 1
1 / 3

Wire Duct for 1010 or 2020 series t-slot extrusion (Vase Mode)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vase mode wire duct/guide that clips into a t-slot 1-inch or 25mm t-slot rail. 18x12mm inside. Lengths 40, 90, or

Ocena
0 / 5
Polubienia
14
Pobrania
89
Wydruki
0
Wyświetlenia
347
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a wire duct/guide that clips into a 1-inch, 25mm, 20mm base t-slot rail. It also fits the rails on my FLSUN SR printer, which are specific to that printer but based on the 2020 profile. Use it with many copies in series to make a fully enclosed wire duct, or individual segments to clip cables only where needed.

The inside space is 18x12mm. Solidworks and Fusion 360 files are included for anyone who wants to customize. In the Solidworks file you'll see the different length options are just different configurations of the same part. To make custom lengths, you can also simply scale the z-dimension in your slicer to whatever length is needed (or is printable).

Profile dimensions shown below.

I designed this to print in vase mode with 0.5mm extrusion width, for a wall thickness of 1mm. Vase mode gives the nicest results, but it's not strictly necessary. 

Tagi