Heart Box With Surprise
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heart box for your darlings
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 609
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I modeled a heart box with a surprise inside for my girlfriend.
To print, you also need:
- 12x neodymium magnets 3x3 mm
- 1x spring 7.5 x 35 mm
- double-sided adhesive tape
- super glue
I created the model so that it can be used both with a heart inside and as a box itself. I glued the base of the spring with double-sided adhesive tape. I lightly dripped super glue on the spring at the joints with the heart and the base. I also glued the emblem to the top of the box. I connected the hinges of the box with a piece of filament and sealed the filament on both sides.
I printed all parts except the bottom box without supports, because the hinges have a smaller overhang.
The holes for the magnets have a 0.2 tolerance, so it is better to glue them with super glue as well.
I printed smaller parts like the heart and the spring base at a slow speed of about 30mm/s and cooled it a lot.
I hope someone will like the model and it will make their loved one happy on Valentine's Day.