Heart Box With Surprise
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heart box for your darlings
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 33
- Makes
- 0
- Views
- 609
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
I modeled a heart box with a surprise inside for my girlfriend.
To print, you also need:
- 12x neodymium magnets 3x3 mm
- 1x spring 7.5 x 35 mm
- double-sided adhesive tape
- super glue
I created the model so that it can be used both with a heart inside and as a box itself. I glued the base of the spring with double-sided adhesive tape. I lightly dripped super glue on the spring at the joints with the heart and the base. I also glued the emblem to the top of the box. I connected the hinges of the box with a piece of filament and sealed the filament on both sides.
I printed all parts except the bottom box without supports, because the hinges have a smaller overhang.
The holes for the magnets have a 0.2 tolerance, so it is better to glue them with super glue as well.
I printed smaller parts like the heart and the spring base at a slow speed of about 30mm/s and cooled it a lot.
I hope someone will like the model and it will make their loved one happy on Valentine's Day.