1 / 3
basic Plant Shelf with dowel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extremely simple plant shelf done with a 21mm thick dowel, some screws and 3d prints, hope y'all like it!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Just a little rest of a dowel I had laying around from 2 years ago, plus it surely was a fun little project that took 1 day to design, be free to make the legs as long as you want them, but here are the measurements of the dowel I used:
(Thickness → 21mm)
Length (legs) → 200mm (4 times)
Length (long mid part) → 169mm (1 time)
Length (smaller mid parts) → 70mm (2 times)
This will allow you to use a 1200mm dowel for this project, it really was all that i had after all.
Good luck ^^
~TAR.