Single Extruder/Multi Part Rose (fusion360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rose that splits into 3 parts to be printable in color on a non-mmu 3d printer.
- Ocena
- 4,909 / 5
- Polubienia
- 107
- Pobrania
- 818
- Wydruki
- 14
- Wyświetlenia
- 2422
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily.
In addition to the main model in 3 parts, I added a version of the flower with a flat base and without hole would you only want to print that part. I also added a decimated version of the base model for future remixes and since the base model doesn't include an stl file it can serve as an alternative as well. Finally, an alternative stem is also provided that has a ticker connector with the flower to tighten the fit.
Printing Information:
- Split the model to its parts and print each part separately
- (Replace the stem model with the tighter version, if preferred)
- Print all the pieces upright
- Use regular adjusted supports for the stem
- Use tree suports for the flower
- Add a brim to improve stability
Note that I had to comply with the license of the base model and that the license of this model is therefore also non-commercial. Would I have had the choice, only attribution would be required. This also means that, would you have commercial permission from the base author, you can use this one as well with no extra steps.
---
Erratum (02/02/25): Addition of a new stem that tightens the connection between the stem and the flower.