Voron V0 (0.1 + 0.2 + R1) Linear Rail Guides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Need a comprehensive set of rail guides? Now you can have just that!
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 134
- Wydruki
- 2
- Wyświetlenia
- 786
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
VORON V0 LINEAR RAIL FITTING GUIDES
These guides have been designed to give a near perfect fitment of your rails to the extrusions straight off the bat.
they position your rails from each end of the extrusion and centre them at the same time!
These would be ideal for new builds but would also be very handy when doing that full strip down and rebuild!
Featuring tabs on the inside to align the guide to your extrusion to help make things nice and square!
Another small but mighty feature is the fixing screw hole on the ends allowing you to secure with an M3x10 SHCS screw to lock it all in place while you tighten down your rails.
small debossed text is on each guide so you wont get mixed up putting the wrong one on too!
the printed guides are pre-laid on a bed ready for printing for maximum ease of use.
just follow the Voron Printing settings and your off to the races.
4 perimeters
5 top / bottom layers
40% infill
Feedback is always welcome!
Happy printing!