Arducam B0506 Camera Housing and Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the camera arm made for Boogie's x-axis revision. Print in PETG at 30% infill.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a revision of the camera arm that Boogie had provided to serve as a base for people's own designs. I extended the length of the camera arm and added a bend to create a viewing angle. It should be printed in PETG at 30% infill; if you trust your PETG adhesion then you don't have you use a brim but using one would not hurt.
I used primarily M3 nuts and screws, specifically M3 x 12 screws for the M3 nuts that are press fitted into the front housing for the camera module. M3 x 20 screws are used to connect the back housing to the front housing. I also used zip ties to secure the wire that connects the Arducam B0506 to Raspberry Pi 3B that I used. Below are the Amazon and Arducam links for the camera module:
Amazon: https://www.amazon.com/Arducam-Computer-Automatic-Switching-Infrared/dp/B0CZL1X463
Arducam: https://www.arducam.com/product/arducam-1080p-day-night-vision-usb-camera-2mp-infrared-webcam-with-automatic-ir-cut-switching-and-ir-leds/