Arducam B0506 Camera Housing and Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the camera arm made for Boogie's x-axis revision. Print in PETG at 30% infill.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 95
- Makes
- 0
- Views
- 346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a revision of the camera arm that Boogie had provided to serve as a base for people's own designs. I extended the length of the camera arm and added a bend to create a viewing angle. It should be printed in PETG at 30% infill; if you trust your PETG adhesion then you don't have you use a brim but using one would not hurt.
I used primarily M3 nuts and screws, specifically M3 x 12 screws for the M3 nuts that are press fitted into the front housing for the camera module. M3 x 20 screws are used to connect the back housing to the front housing. I also used zip ties to secure the wire that connects the Arducam B0506 to Raspberry Pi 3B that I used. Below are the Amazon and Arducam links for the camera module:
Amazon: https://www.amazon.com/Arducam-Computer-Automatic-Switching-Infrared/dp/B0CZL1X463
Arducam: https://www.arducam.com/product/arducam-1080p-day-night-vision-usb-camera-2mp-infrared-webcam-with-automatic-ir-cut-switching-and-ir-leds/