Dishwasher door retract mechanism parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement parts to fix a common problem with the door on Bosch dishwashers
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't want to replace the bottom case or start drilling into it to attach the stud that apparently is common to break off on my model of dishwasher. I therefore opted to design a retainer that affixes the guide to the surrounding case. I also included a replacement guide and a reinforcing part.
If you have a broken Guide: Print the “Guide” available with two different inner hole diameters to compensate for printing tolerances and maintaining clearance.
If you have a broken case stud: Print the "Retainer" similarly available in two different stud diameters
If your case stud is ok, consider printing the Reinforcement part to strengthen it and prevent it from breaking off in the future. (Note i'm not able to test the fit of this part as both studs had broken off on mine)
I recommend printing in Nylon, PETG, ASA or ABS. Lubricate the string by for example rubbing it against a candle, waxing it or using another compatible lubricant. Use several walls or 100% infill on the guide to improve wear durability.
Mirror the part for use on the other side of the dishwasher
