Shoe Stacker Pro | Quick Print and Different Strength Options
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are many shoe stacking models out there but none that prioritize material use so I made my own.
- Ocena
- 0 / 5
- Polubienia
- 69
- Pobrania
- 222
- Wydruki
- 0
- Wyświetlenia
- 1276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This shoe rack is strong, holds mens heavy bicycling shoes with no problem, uses minimal filament and look clean and polished. Hopefully you find this model as rad as I do.
The standard plate which most should print hits the print goal 2 hours or better on a Bambu and under $2 dollars of filament but is much stronger. The platform is still thin and there may be sag with heavy shoes but the tower is stronger with a better geometry.
In addition to the standard model there is a new Tuf model that adds an extra 2 MM of thickness to the platform. This of course adds some time but makes for a stronger platform.
There is also a Max model which makes the tower even thicker and the platform extra strong. I haven't tested what this can hold yet but I certainly will hold all your heaviest shoes. The goal here is a print under 3 hours, 50% more than then the standard print but when you need the strength you need the strength!
Lastly there is a Mini model which is perfect for kids shoes