Shoe Stacker Pro | Quick Print and Different Strength Options
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There are many shoe stacking models out there but none that prioritize material use so I made my own.
- Rating
- 0 / 5
- Likes
- 70
- Downloads
- 223
- Makes
- 0
- Views
- 1,291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This shoe rack is strong, holds mens heavy bicycling shoes with no problem, uses minimal filament and look clean and polished. Hopefully you find this model as rad as I do.
The standard plate which most should print hits the print goal 2 hours or better on a Bambu and under $2 dollars of filament but is much stronger. The platform is still thin and there may be sag with heavy shoes but the tower is stronger with a better geometry.
In addition to the standard model there is a new Tuf model that adds an extra 2 MM of thickness to the platform. This of course adds some time but makes for a stronger platform.
There is also a Max model which makes the tower even thicker and the platform extra strong. I haven't tested what this can hold yet but I certainly will hold all your heaviest shoes. The goal here is a print under 3 hours, 50% more than then the standard print but when you need the strength you need the strength!
Lastly there is a Mini model which is perfect for kids shoes