Counting matching models…
A simple holder model with a hexagon-base and variable settings for diameter, height bottom/top opening. The file is parametric, however, given the interaction between the different measurements, fillets etc. makes it a slightly…
As my pots of Revell paint were being stored in cardboard boxes, I took the time to create an organiser. Lightweight and printed with little material. Available in 3 sizes for 25, 20 and 15 pots. Stackable, combinable. Printed without…
i wanted to make something to stack my empty water bottles. this two piece print can be glued together and prints well without supports. i used 0.28 layer height and 12 percent gyroid infill. base is designed to contour of bottle…
This model is designed to be printed without supports. This 14mm Dice Stacker stores up to 40 dice and dispenses 5 dice at a time for easy counting. If you do make this model, please show me your makes too! Note: This model is designed…
This was designed to minimize print time and save space. This model allows stacking 2 cans horizontally. I designed it for 67mm diameter, but it also works for smaller cans and even bottles. I can adapt these for smaller or larger cans if…
Silicone tape was used to reinforce all connections. Ended up being quite stable but your mileage may vary- I take no responsibility for your reptiles' safety. More parts in CAD below, but they aren't tested so make sure to measure…
Replacement brackets for the Urban Worm Bag, both versions 1 and 2 (v2 found at the link below). The example image above shows versions 1 and 2 stacked together.…
The IKEA 365+ storage containers are great as they really close totally. But the lids wont stack. Printed in PLA
Printed with my ENDER 3, at 0.28mm layer height, using the default Cura 5.8.0 config. Takes around 5 hours to print Update 01/02/26 Added a 2.0 version and one without the middle wall
Description I found there weren’t many options for Blue Alpine tray stackers after getting a freeze dryer in December 2025. I needed to utilize the space in my actual freezer more efficiently as part of the prep process to eventually…
Decretive Rainbow stacker I designed this for my toddler and thought I’d share! Perfect for a decorative shelf piece or for your kid to stack! Really easy to print! No supports needed and each piece has its own profile so you can print…
I was a little miffed at not being able to properly stack loose soda cans on top of each other, so designed this solution. The primary file is an OpenSCAD script that allows you to customise a sleeve to easily and securely stack soda cans…
This is a simple 2-level car lift/stacker made for LEGO Speed Champions. It lets you park/display two cars in the space of one, perfect for shelves or a garage display. I printed mine in PETG for extra strength and durability. The model…
Just print as is, without supports. I've used 0.32mm layer.
SSD Stackers for 15mm U.2 size SSDs are meant to allow you to stack and mount two or more SSDs together You will need 4 per SSD you add to a stack. A stack of 2 needs 4, stack of 3 needs 8, etc. Always start by mounting your top drive…
By default, empty jars don't stack well. So I made this model to be able to stack multiple jars in the kitchen cabinets. I'm also using this model to keep the lids organized :…
Soundboks 3 and 4 corners have spheres for feet. Print 4 of these and sandwich them between the balls.
This ring enables you to stack otherwise hard to stack glasses/mugs/cups giving you more space in your cabinet. Chamfered inside to better fit multiple sizes but resizable in slicer for larger or smaller sizes.
Some cans are already stackable, but not all of them. This simple PLA ring allows the non-stackable cans to be stacked quite high. I recommend printing at 0.2mm layer height with a small brim. You could use PETG filament for more…
A modular yarn cone stacker designed for machine knitters to easily combine multiple threads. Features: Modular Design: Configure with as many tiers as needed (3 tiers tested for maximum stability). Print-Ready: Optimized to fit Original…
The set of files for vertical spool stackers is perfect for those who only need a few spare spools of filament. Keep your empty SUNLU spools neatly stacked while you wait for your refills to arrive. For larger holes, there is a file for…
On July 15, 2026, all files were edited: - The screw holes and electrical cable entry holes were enlarged. - 3MF files now include the Fiberlogy PCTG printing profile (printer CORE One L). Overall dimensions: 174x120 mm Print in PETG or a…
Building Platforms Stacker for Formlabs' Form2 ( & Form1+) (one platform per material avoid cross contamination). STL & STEP files are available here. Empileur de Plateformes de Construction pour Form2 (& Form1+) de Formlabs (une…
This adapter allows you to add a 41mm OD humidity sensor to the front of the F-BOX by the filament exit without having it take up a desiccant slot. It's a tight fit, just push down. I used these sensors:…
This is a mod of StephanieS spool roller for the Stacker F-Box It is adapted to use 608z bearings and with a smaller outer cylinder diameter for spools with an inner diameter of 50mm or bigger It also includes an M6 allen key hole for…
Filament Stackers v4 Many of us don't have horizontal wall space for a RepRack or shelves to hold our filament. We need to think vertically. That's where the Filament Stackers come in. You can expand your stack according to your space and…
Vertical stackers for my modular modelling and miniature game paint bottle holders ( https://www.printables.com/model/1001405-modular-modellingminiature-paint-bottle-holders-mp ) Spacer and Double Stacker seems to work. Triple and…
Lightweight versions of my vertical stackers for my modular modelling and miniature game paint bottle holders ( https://www.printables.com/model/1001405-modular-modellingminiature-paint-bottle-holders-mp ) Interchangeable with their…
This is my attempt at designing a supportless shoe stacker with low filament usage. PLA compatible! I plan to play around with the thickness of the walls/ceiling, to see how low I can go before it gets unstable. I also want to make a…
Simple ring that fits around the top of a 1lb smokeless powder bottle so that they can be stacked on top of each other. These were printed with standard PLA, 10% Cubic Infill, No Supports, with an 8mm Outer Brim. Note: Because the base is…
This is a basement for my NFC Deck keypad to hold the NFC cards close to it that are used. This can be for an NFC powered movie or music system, or any other use of the NFC tags in Home Assistant automations. It should be printed…
STL has custom support built in, print with support DISABLED. or don't im not your boss
Uses standard #6-32 UNC PC screws (four at the bottom of the top drive and up to six on the sides of the bottom one. Inspired by version made for 2.5in drives: https://www.printables.com/model/269975-ssd-stackers-25-hdds-work-too
Sippy Cup Lid Stacker to hold those kids cup lids that don't stack worth a flip
Stack two USW Lite 8 or Flex Mini switches on top of eachother! Works while one is mounted to the wall. Also works while horizontal. No need to disconnect any cables. Plenty of space between switches to keep them cool. Stock wall mount…
Holder for 10 85-mm-lids from pickle jars (standard diameter in Germany). This is an easy way to store the lids when reusing empty pickle jars. The design is parametric and can easily be customized for a different number of lids or…
This is the 3D print file for a stacker dashboard that holds two Stream Deck XL button boxes. The fit is tight by design when inserting the Stream Decks, so fasten your USB cable before you press them in. I was inspired by this…
Intended for glasses of diameter 37.2mm in the middle. Wider glasses can be placed, but they wont fall through. Thinner glasses will grab by the top. Currently its a bit wobbly if you put a glass only in left/right sections, but I…
I wanted an AMS stacker that was sturdy, but didn't require additional footprint on my workspace and would work with the AMS drawer stand I already had. I also didn't want an absurdly tall tower of AMSes making my already small office…
As my pots of Revell paint were being stored in cardboard boxes, I took the time to create an organiser. Lightweight and printed with little material. Available in 3 sizes for 25, 20 and 15 pots. Stackable, combinable. Printed without…
This model is based on the cassic children’s stacking toy, which offers numerous benefits that contribute to infant development. One of the main aims being to aid in the development of fine motor skills for infants. Engaging infants in…
I needed a simple system to keep my plates stacked, so I made this. You can print as many as you want and stack them together. Each one takes 8 plates. Fits both bambulab and prusa plates.
Introducing the Mug Stacker V2 —a simple and elegant solution designed to organize your mugs safely and efficiently. This innovative device allows you to stack most mugs securely, maximizing your kitchen cabinet space and keeping your…
This is a spool stacker and optional separators for 1kg spools. I designed this in Inventor Pro 2025. This was originally designed as a contest entry but now I'm putting it online. I will include the IPT files so you can change anything…
Sour Solutions I purchased the 2 pack of Elegoo's mini air purifiers with activated carbon filters for my resin 3D printer, but I had very limited space within the print chamber and needed to stack them to fit both purifiers within the…
Additional to the original model. I have added an upright that will allow the model to created with multiple columns of vehicles.
Spools are connected together when stacked. Prevents the spool tower from collapsing. It is made by combining three parts.
A stacking toy made up of a base and 5 stars. Filaments used- Polymaker Translucent Rainbow PLA, Neon Yellow PLA
This is for folks with the double-layer player boards that come with Maracaibo: Uprising. There may be some other way to get them. Tired of having your stacked boat discs go flying any time you bump your boat, fat-finger picking a token…
This is for folks with the double-layer player boards that come with Underwater Cities: New Discoveries. There may be some other way to get them. Tired of having your stacked city discs go flying any time you bump your city, fat-finger…
This is a “Sandwich Stacking Toy”. Print as many of any of the items as you like to make your own clever creations. Another fun way to enjoy this is to give kids “orders” of sandwiches you would like and have them replicate patterns that…
i wanted to make something to stack my empty water bottles. this two piece print can be glued together and prints well without supports. i used 0.28 layer height and 12 percent gyroid infill. base is designed to contour of bottle…
This model is designed to be printed without supports. This 14mm Dice Stacker stores up to 40 dice and dispenses 5 dice at a time for easy counting. If you do make this model, please show me your makes too! Note: This model is designed…
With 32.3g of filament you can stack your IKEA ELLOVEN monitor stands securely. Original model on onshape: https://cad.onshape.com/documents/e5aaa82f7c4c7736ffacb6a6/w/7e10240118f7a37071f3b9b5/e/20793127b6e9a4a466b676ae
Upgrade your kitchen storage with this modular bowl organizer, expertly designed for stacking and storing ramekins or small bowls with a 10 cm diameter (should also work for slightly smaller ones) . The modular design allows you to add or…
Just stack samla 5l boxes. I have printed in PLA, but I can imagine that for heavy stuff Samla_5l_StackerA should be printed in PETG, due to the "lever". Samla_5l_StackerA serves both purposes (exacly on top and turned by 90°).
Remixed to be compatible with Hatchbox filament boxes. Adjusted the thick side to the correct dimension Added some thickness to the thin side because it sits a few mm lower than the thick side. Print Settings Resolution: 0.3 Infill: 0%…
Bought a Melissa and Doug Geometric Stacker second-hand. It was missing the octagon topper piece. This model completes the set. It's a bit too wide in the pictures. The uploaded model narrows the piece a bit to make it look more like the…
Each color is on a different plate so you do not need AMS to print this. Each heart is 5mm shorter than the next going from inside to outside so you can see all the colors from the side when placed together.
Simple model used to stack the US General mini toolboxes. I made it so it can be printed easily on an A1. brace in the center serves to divide the upper area of the lower box as well as push the sides out in all directions to make a…
Ikea Blomning Tea Box Stacker - Staplå A simple yet effective solution to a common storage problem - the inability to stack Ikea Blomning tea and coffee storage tins. This cleverly designed connector piece allows you to safely and…
This shoe rack is strong, holds mens heavy bicycling shoes with no problem, uses minimal filament and look clean and polished. Hopefully you find this model as rad as I do. The standard plate which most should print hits the print goal 2…
Stackable braces to hold various pieces off of the ground or floor while painting or staining. You can stack them to let all of your pieces dry without worry of them getting marked up. Multiple hole for screws to attached to your piece or…
Mason Jar stacker for wide mouth mason jars. Fits most brands and sizes tested. Print in PETG so you can dishwash top shelf if it gets food on it. Add a 2mm internal brim to get better plate adhesion. Slice the brim off before use. On the…
I use a variety of different jars for storage in my pantry, but it's a very small space and stacking the jars inevitably led to accidentally knocking some of the stacks. This remix lets me stack Ball Mason jars on top of my bale top jars.…
Designed to allow multiple Freewell lens filters to be stacked for more filter combinations on an Osmo Action 5 Pro camera. Should work with Freewell's Action 3 and Action 4 filters as well (I think they're all the same), but that's…
I wanted to stack multiple copies of the fantastic filament swatch holder designed by @GM5DNA , so I made a new Gridfinity bin with a cutout in the bottom to fit over the swatch holder. There's also a cutout in the front that matches the…
This was designed to minimize print time and save space. This model allows stacking 2 cans horizontally. I designed it for 67mm diameter, but it also works for smaller cans and even bottles. I can adapt these for smaller or larger cans if…
I remixed the TickTock short tray stacker to eliminate the binding in the corners on the newer Harvest right trays. After some fiddling around, I arrived at a crudely modified design that seems to print well for me with no support.
Stack your Python AMS Enclosures with sliding trays for easy access. Store your build plate easily.
This euro coin collector features 9 vertical compartments for efficient stacking and organization. It holds all standard euro coins (1c, 2c, 5c, 10c, 20c, 50c, €1, and €2) plus an additional slot for a second 20-cent stack. Dimensions:…
Print: 1 grid 1 utilbox 2 car_frame 2 car_base (upside down) Assembling: Lay down the grid into the box. Clip one frame into one base and park a car. Repeat this step. Stack the arrangements onto the grid in the box. Place the util box in…
Coin Storage - Coin Stacker | 3D Printable STL File Design your own custom coin storage with this Coin Storage - Coin Stacker .STL file ! This 3D-printable design allows collectors to organize various coin sizes efficiently, keeping their…
I had trouble printing the upper (stacking) wings so I added some support in the model for a cleaner print from the first layer up.
I designed this to allow to stack food cans on top of each other to save space in the cabinet. I have designed 2 main sizes as I've seen that those fit almost all food cans I generally buy. If you find one that doesn't fit you can always…
An Ikea Lack stacker that adds a horizontal no-screws connection, in addition to the usual vertical stacking. For style consistency, I'm including a light minimalist corner part even though it is very similar to two models already…
The brand of dog food I buy is not stackable at all. I made this ring (a.k.a The Stacker) that fits the 102mm (28oz) cans perfectly. It can be scaled to fit any size can. It prints one ring with support in just 22 min on an Ender 3 V3 KE.…
Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ I was looking for the right filament stacker / storage system, but couldn’t find one that matched my…
Simple way to hold polydryer box on the roofrack. The two part version for the actual dryer has holes that can be used to locate the parts. They are 2mm to accomodate filament as dowel. You can push the filament in from the top and snip…
FIRST READ THIS! This is a lifter to stack anything you want, see photos… I made this for my dad who is a DJ so it is actually made for synths and other DJ stuf, but you can use it far other things to… P.s. you should look at the 3d…
This little lids organiser keeps your cupboards neat with stacking all the lids together. There is a a finger slide to make it easy to slide lids up but can stand on the shelf as easily as the bottles.
Da vi i sin tid "opfandt" LUX burene, havde vi en udfordring med at stable dem, uden at de gled fra hinnanden. Den gang fandt vi på en simpel, men ret primitiv løsning, som fungerede, men var bøvlet (og knap så ellegant). Nu, godt 10 år…
Remixed to increase the extension length to 140mm. Also increased the height of the top lip for more secure stacking. For V1, print with tree support. For V2, print with normal support. Added Fusion files for anyone who would like to…
I needed to stack 4x SSD's for my recent server upgrade Category: Computer
Description: Recreate the magic of a beloved classic toy with this custom-designed Klip Klop Ramp and Stacker for Little People Klip Klop Horses ! This digital download includes high-quality STL files that allow you to 3D print your very…
Holders for 100 mm x 100 mm square coasters to tidy up your table. These fit most coasters of this size, which I have a sizable collection of. I've included two versions - one that can stack four high and one that can stack six. I…
Yellow Reach Stacker (Basic) - Fully Functional 3D Model(1:30 scale) This is an assembly model which requires use of glue. Reach stackers are the giants of the container yard—precise, powerful, and endlessly fascinating. Their ability to…
This model stacks and you can see each color top down and from the side.
I made the original design double sided for stacking multiple rows of games. Prints well in vertical orientation without supports
I did not design the stands themselves, so I have not included them in the files
Silicone tape was used to reinforce all connections. Ended up being quite stable but your mileage may vary- I take no responsibility for your reptiles' safety. More parts in CAD below, but they aren't tested so make sure to measure…
my son wanted to stack the models because he has a lot of them. we didn't like the stackers available online. you can stck them one above the other endlessly
This clip lets you stack your drums on top of each other whilst protecting the drum skin. Lets you specify parameters for drum diameters, rim widths and depth. You can add optional magnets to make installation a little easier, as they…
This is a connecting ring to allow the US General and Kobalt mini toolboxes to be stacked. The lid can be opened, add the connector, stack another toolbox on top. UPDATE: I added a version 2.0 for those that want to modify their toolboxes…
