Lack Table Enclosure Stacker Shelf (No Screws)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a way to stack 3 Lack tables together for my enclosure and not have to rely on screwing into the thin walls…
- Rating
- 4.667 / 5
- Likes
- 20
- Downloads
- 221
- Makes
- 3
- Views
- 1,993
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I wanted a way to stack 3 Lack tables together for my enclosure and not have to rely on screwing into the thin walls of the legs.
You can also just use these to make shelves out of lack tables too.
I printed in PLA and it seems to be plenty strong. I've pulled the shelf out (on linoleum) quite a bit to work on the MMU2 unit and the lip on the edge keeps the table from slipping.
Just unscrew the legs, put on the brackets and screw the legs back on.
Vertical tolerance to cup the corner of the top is .5mm and the horizontal is a little larger to compensate for crooked legs.
Please pardon the dust in the pics :)
Print instructions
These were my settings. It took approximately 1:32 per part
Slic3r:
Hatchbox PLA
.3mm
3 perimeters
15% infil