IKEA PRUTA lid holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lid holder for IKEA PRUTA containers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another set of models for the kitchen.
A simple drawer lid organizer. Its dimensions fit the MAXIMERA low drawer. Design for square container lids.
The height of each is about 7 cm.
Dimension:
- Small lid dimensions: 92 mm x 92 mm
- medium lid dimensions: 117.5 mm x 117.5 mm
- large lid dimensions: 134.4 mm x 134.4 mm
Fits the lids from the PRUTA set from IKEA. The large one fits the containers that can be purchased in a set of 3 with a capacity of 0.6 l.
Additionally, there are prepared recesses underneath to place silicone bumpers (such as those supplied for UTRUSTA hinges from IKEA).
Preferred size of the silicone anti-slip pad: <8 mm in diameter, <1.5 mm in height.
Print settings:
Nozzle 0.4 mm
Layer: 0.2 mm
Infill 15%.
Brim: not needed, but depends on the adhesion of your bed.
I printed with PLA.