1 / 4
Crimping Tong / Pliers Holder - Crimpzangenhalter -  Ikea Skadis — zdjęcie 1
1 / 4

Crimping Tong / Pliers Holder - Crimpzangenhalter - Ikea Skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sturdy holder for the HOLEX 72 9700 6F or similar crimping tool, also used for wire stripping and ferrules.

Ocena
0 / 5
Polubienia
6
Pobrania
49
Wydruki
0
Wyświetlenia
199
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Printed in FilamentPM Graphite Black.

Use Organic Supports (Prusa Slicer) on the printbed only. If you like you can add infill-modifiers to the skadis-hooks, as they sometimes are hard to get into the board and break in the process (though I didn't do it on my print).

Add your paint-on seam to the backside that is facing the Skadis board.

Depending on your printbed-adhesion: Add a brim!

Check the dimensions in your slicer before printing if you are using slightly different pliers!

 

Skadis-elements on the back inspired by 3dball's model (https://www.thingiverse.com/thing:2749146).

Tagi