Crimping Tong / Pliers Holder - Crimpzangenhalter - Ikea Skadis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sturdy holder for the HOLEX 72 9700 6F or similar crimping tool, also used for wire stripping and ferrules.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 49
- Makes
- 0
- Views
- 199
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Printed in FilamentPM Graphite Black.
Use Organic Supports (Prusa Slicer) on the printbed only. If you like you can add infill-modifiers to the skadis-hooks, as they sometimes are hard to get into the board and break in the process (though I didn't do it on my print).
Add your paint-on seam to the backside that is facing the Skadis board.
Depending on your printbed-adhesion: Add a brim!
Check the dimensions in your slicer before printing if you are using slightly different pliers!
Skadis-elements on the back inspired by 3dball's model (https://www.thingiverse.com/thing:2749146).