Counting matching models…
Simple holder that allows easy storage of crimpers, pliers, and other similar tools. Print as many as you need and combine with 3/8" wood dowels. Included step file if you need to adjust the holes or cleat size.
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
I wanted to make a quick disconnect cable for my MK4 in the original enclosure, but since the ribbon cable comes pre-split from Prusa making my own seemed like a good idea with some more standard IDC connectors at the midpoint. Micromatch…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
A frame for 8 jaws for a crimping tool. A long 2.5 mm Allen key slides in from the side. The frame fits snugly into the case that usually comes with the crimping tool. The jaws fit snugly. Loose jaws are held in place by magnets. I bought…
Print approx. €3.93–€4.80 excl. taxPreliminary estimate for one variant
Crimper model: TV37 PLA or PETG, 0.2mm
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
UPDATE 07.05.2023: After several requests i added the versions for the most common tube sizes (10, 12 ,15, 16mm) and for 18mm french cleat bar. :-) A French cleat holder for the (crimper)pliers! Inspired by a model by Mikhail on…
This is a rework of some similar models on here to be easier to print and more universally fit larger and different branded ratcheting pliers. Has a recess for the ratcheting latch and a lip on the front to keep pliers in place. Tested…
Crimper holder for Honeycomb Storage Wall and Multiboard. Should work with IWISS SN-28B, SN-48B, or similar crimpers. I wanted a mount that held the crimper while open, to avoid having to close it every time. Settings Print upright…
This is for those tiny crimp on dupont connectors that fit inside the plugs that plug into the RAMPS board. Tolerances on this are TIGHT! don't feel bad if you can't print a working one. This isn't going to crush the connector tight but…
A 5x3 gridfinity tray (3 units deep) extruded to fit a very popular wire stripper / crimper / cutter model sold under many different brands with minimal variations. This model, and other very very similar ones, are sold under several…
We have the option either use 2 mm steel pins, which need to be hammered in, or ream the holes to 2.5 mm and screw in M3. If you want a nicer finish you can remove the thread from the screws 6 x M3 8 mm can be longer at most they will…
Holder for the Klein Ratcheting Cable Crimper (pass-thru) / Stripper / Cutter. Model is VDV226-110. This works with the Gridfinity system.
This set of two gridfinity is perfect to store you crimping tool kit. The first bin is for the HSC8 plier. It's 3x5x4U The second bin is to store the ferrules, it's 3x5x5U. See my other gridfinity bins at…
Holder for a SN-48B crimper tool that works with the honeycomb storage wall
This is a rack to hold connection crimpers and their dies. Note that the left-most slot is narrower for simple, die-less, crimper (or wire striper). Print using PLA and tree support. Arrange on bed with the top side of the rack to the bed.
Like my mini crimper but takes advantage of the way 3D printers print in layers to make a much stronger crimper. This should help you crimp those small Dupont crimps so common in our hobby. The Guillotine style allows you to use one hand…
Ferrule crimping plier holder for IKEA SKADIS or UPPSPEL pegboards. I think it will fit and hold most generic no-brand ferrule crimpers. I printed in Black PLA with 35% infill on a Bambu P1S, (tree) supports on, came out plenty strong.…
Holder for a IWS-3220M crimper tool that works with the honeycomb storage wall
Elevate your crafting with our 3D printed paper crimper, expertly designed for both functionality and aesthetics. Standing at 50mm tall, this tool is crafted from durable ABS plastic, ensuring longevity and resilience during repeated use.…
Crimper for 20mm Vials Reccommended Settings: 0.1mm Layer Height 5+ Perimeters If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
A Gridfinity 5x2 holder for an RJ45 crimper and a wire stripper. Wanted to be able to store these in my drawer without taking up much height. My RJ45 crimper default position is open, so to put it in I need to close it, which the…
Gridfinity holder for network crimper plier, made for a crimper with 19cm length, 6cm width at handle. 2x5x4 no magnets.
Bought a kit off amazon and wanted a custom setup, used a 5x5 square and made two 5x2.5 sections. https://www.amazon.com/gp/product/B07PJK2VNT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Made one version to hold this speedloader…
Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/f3ktpdrg2DT-dupont-crimping-tool-multiboard-holder Print instructions…
Holder for a LY-03B crimper tool that works with the honeycomb storage wall
"Crimper" to fold 1/2" poly irrigation tubing to seal the end. Prints in 22 minutes! 3 g of filament at 30% infill, 4walls. Print with PETG for good outdoor quality.
Crimper for 20mm Vials with Attachment Hole Reccommended Settings: 0.1mm Layer Height 5+ Perimeters Recommended Print Orientation as shown If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly…
Here's a Gridfinity 2x5 holder for the Klein Tools 34056 Hex Ferrule Crimper. I've also included a 2x5 5 bin Gridfinity for either standalone use or for use with the 5x4 Gridfinity Storage Box by Pred (…
@Iguanahotsauce made a awesomely simple mount for the Iwiss IWS-3220M crimper for the Honeycomb Storage Wall (HSW), unfortunately I went with Multiboard over HSW. So I removed the HSW mount and added a Multiboard push fit mount, this does…
A tray for a Daniels Manufacturing AFM8 crimper and a few dies. I modeled it for an M22520/2-01 tool, but it will probably work for other tools with similar sized frame.
My printer lacks the ideal tolerances for printing the original file ( https://www.thingiverse.com/thing:1544407 ) with moving latches... after printing and breaking a couple, I realized I could narrow the latches with very little effort.…
Created with the Fusion Gridfinity Generator plugin.
6x3 gridfinity wire crimper holder for the Titan 11477 ratcheting wire crimper
to hold your crimpers
The crimper can be purchased on Aliexpress: https://aliexpress.com/item/1005006474712295.html The model has a hole for the crimping tool, and another small hole for the spare blades.
Simple holder for mounting various wire crimpers on a skadis board. I'm currently using it to hold up a pair of Klein ratcheting crimps, a pair of no-name ferrule crimps, an iwiss deutsch connector crimp, and more This project makes use…
This is a stent crimper for initial setup of stents intended for insertion into the human body. Category: Hand Tools
I couldn't find a suitable wall mount for my wire stripper / crimper, so designed one of my own. No supports needed if printed standing up as shown in the photo. I have also included a test piece that you can print in a couple of minutes…
There are many different variants of crimper handle, so make sure it's the same one before you print. I used a 2mm offset for the provided STL, but I think it can go lower to 1mm. Provided f3d file with the cutout, you can check to see if…
Description Crimper jaws and spacers to help with crimping the TE 160783-7 Gaggia boiler terminal connectors. While the wire connection can be crimped with a standard open-barrel terminal crimper such as the Engineer PA-20 in multiple…
I wanted a gridfinity holder for my Daniels AF8 Crimping tool and an extra turret. The long slot is just for some extra tooling if you have it.
This is my Coin Roll Crimper design for MKD (Macedonian Denars) coins. The design is made in SolidWorks and can be adjusted to fit any type of coins, if you are interested feel free to write me and I will give you the original SolidWorks…
I've been accumulating crimpers, and needed a handy place to keep them at the ready. This lets me mount them securely to either the wall using #10 screws, or to standard pegboard using my pegboard rivets.
Bought a couple more crimp dies (or bits) for my Toolcraft PZ-500 crimper, a a tool that can crimp most electrical terminals or connectors. However, the original storage box has limited place for the dies, so I made my own interior with…
There already is a similar case, I just needed a smaller one. I found the other one non-remixable (poor geometry), so I took inspiration and designed a new one for my set of dies. It's print in place, you need nothing else to complete it.…
Gridfinity storage for JST crimpers
Crimpers are hard to mount to a pegboard. They're big, weirdly shaped and have no obvious mounting holes. Additionally, you often get interchangeable dies which are easy to misplace and don't have good ways to organize. There are two…
This is a stand for organizing the various jaws that come with the iWiss crimping tool linked below. https://a.co/d/eFWPzec
A simple 5Ux2U Gridfinity Insert for the SN58B crimping tool (by Lion Rage). Probably compatible with most SN-series tools (ex. SN-28B, SN-48B). Designed in 2 variants: Low profile 3U in height (not stackable) Normal profile 4U in height…
Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/1OadgBVidm6-dupont-crimping-tool-pegboard-holder Print instructions…
This imports into the slicer weirdly, just convert to MM or convert to Inches and it should fix itself within the slicer. Feel free to remix!
The Gridfinity bug is running rampant in my shop, and this is just another bin to help me organize my tools. It fits the Engineer PA-24 wire Crimpers. Should print easily on almost any printer, and it can accept 6x2 magnets on the bottom.…
Ratcheting Wire Crimpers Gridfinity Tray, Amazon link: haisstronica Crimping Tool For Heat Shrink Connectors-AWG 22-10 Ratchet Wire Terminal Crimper-Ratcheting Crimper Tools-Available For Insulated Nylon Connectors and Electrical Wire…
Case for SN-58B Crimper and 6 replaceable sponges Кейс для кримпера SN-58B и 6 сменных губок
I have printed from PETG. The wall is thin to fast it print. If your pliers has different dimensions or want thicker walls you can change the Fusion 360 model.
I had purchased a set of Dupont crimping dies (https://www.amazon.com/dp/B0774V8HXZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2) for my Paladin Tool Crimp-all and didn't realize I bought one that was too small for it. I didn't want to…
A quick remix of @Shabubu's 'Dupont and JST Crimper Multiboard Holder' to make it a bit wider to fit larger crimpers
created a crimp holder for gridfinity system for the amazon HKS Crimper. i used PLA+ 05% infill and Lighting infill.
This is a holder for a ThermoFisher 12mm vial crimper. Category: Tool Holders & Boxes
This model is a Gridfinity compatible organizer for the Klein VDV226-005VDV226-005 Compact Pass-Thru Modular Crimper as well as a mini cable stripper tool. This is great for organizing your network cable tools all in one convenient place!
This holder fits 2 types of Someline crimping pliers: 2 slots for the Someline 10A4 and/or 10A6 ferrule crimpers (4 jaws and 6 jaws, respectively). 1 slot for the Someline 2350M terminal crimper for Dupont / NSR connectors and JST-XH…
This print is designed to fit in this DEWALT box . The crimp inserts should just touch the lid. If it's a little loose, a touch of hot glue will keep it from wiggling. You could also laser cut this out of two pieces of 4mm acrylic, grab…
Gridfinity holder for Cenby wire crimpers. I'm sure that it will fit other crimpers. I split it into 2 parts so that I could fit them into the ender3 bed. I've included the freecad files, in case you want to edit it.
Remixed Maksym's box to have two short rows to hold the dies that I use with the Ideal Crimpmaster. Box will handle short dies from most manufacturers as well as most short clone dies. Used 4-40x 1-1/4 inch screws. Used PETG for the box…
A gridfinity holder for the AMP AF8 crimping tool, and 6 spots for turret heads. I put the most common ones up there.
I still like to use good old-fashioned boards as tool walls rather than the Skadis system people like these days, so I need lots of custom tool holders mounted by plain wood screws. This is the one I designed for the SN-58B crimping tool…
Should work with IWISS SN-28B, SN-48B, or similar crimpers. Modified for usage with openGrid.
The IWISS HD-2612D and similar crimpers have a positioner that screws into the back to hold the contact at a specified depth during the crimp operation. This positioner makes the whole unit too thick to fit in most toolbox drawers.…
This is a mount for some generic wire crimpers. It is based on the "Pegboard Tool Mount System" by eric-anastas. You can get the proper hooks for your pegboard from his design. The opening is 55mm x 15mm. Category: 3D Printing
IKEA SKADIS Ali Express crimper and wirestripper made to use less space This is the crimping tool
Harbor Freight Icon 7" Wire Stripper, Cutter, Crimper Gridfinity Bin. 2x5
Gridfinity 6x3x6u for RJ-45 RJ-11 RJ-12 Crimper tool. Could not find a gridfinity bin for my specific tool so I made one. This tool model seems to be commonly referred to as HT-2008A, HT-2008AR, HT-2008R, HT2008A, HT2008AR or HT2008R.
No need to use electrical tape or zip ties to prevent dies from rattling or getting lost — this simple bracket will keep them paired. Features a hole in the middle for convenient hanging or stacking. Works for any pair of round U-type…
I used tinkercad to model some simple climbing holds. Unfortunately the banana jug is only 7 inches due to miss measurement on my end and so is the crimper with that banana jug. This project was made in the span of a few hours so…
Gridfinity holder for Cenby wire crimpers. I'm sure that it will fit other crimpers. I split it into 2 parts so that I could fit them into the ender3 bed. I've included the freecad files, in case you want to edit it.
Коробка Gridfinity 5x2 для сетевого обжимного инструмента RJ45. Хотелось хранить их в ящике,как и другие обжимные клещи.
Harbor Freight Icon 7" Wire Stripper, Cutter, Crimper Gridfinity Bin. 2x5
Took inspiration by @PeteD crimper rack and modified it a bit to be able to print it on my Sovol Zero bed (150mm). Printed it in PETG I had lying around but any material should do. Print config: -3 walls, 3 top/bottom -0% infill The…
A simple 5Ux2U Gridfinity Insert for the SN58B crimping tool (by Lion Rage). Probably compatible with most SN-series tools (ex. SN-28B, SN-48B). Designed in 2 variants: Low profile 3U in height (not stackable) Normal profile 4U in height…
This is a paper crimper and it works pretty well so i suggest you use it and it isn’t big at all!
This is a rack to hold connection crimpers and their dies. Note that the left-most slot is narrower for simple, die-less, crimper (or wire striper). Print using PLA and tree support. Arrange on bed with the top side of the rack to the bed.
Pretty self-explanatory - Mine is the HSC8 6-4A budget special, but seems to work for many others. Originally taken from https://www.thingiverse.com/thing:5535836 and adapted for HSW.
Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/f3ktpdrg2DT-dupont-crimping-tool-multiboard-holder Print instructions…
I have printed from PETG. The wall is thin to fast it print. If your pliers has different dimensions or want thicker walls you can change the Fusion 360 model.
This is a pegboard holder for the Wirefy quick change jaw terminal crimpers, sized for 1" spacing, ¼" hole pegboard. Pegboard mounting uses 6mm, screw-in/out automotive rivets, which I've found to be easy enough to install and remove with…
The original model is used for the other tools, only the yellow dupont crimper is using this remix
The original model posted by @Paradox is great, but it requires the use of M2 screws and nuts. I wanted a version of this tool holder that didn't require any additional hardware to use. I added two hooks on the back that will fit onto the…
super simple wall mount hanger for strippers . quick print, 36 mins for me
IKEA SKADIS Ali Express crimper, with storage for extra inserts This is the crimping tool
This crimper had no box and i don't wanted to run after it. That why i did this box which is fixed on the Assortment box (zbs. aliexpress). it is done for 205x105mm assortement box.
Printed with 0.6 nozzle diameter PLA. Settings: 4 walls, 15% infill, 3 top-bottom layers No supports needed. For second part you should clone and mirror by X-axis the original. You can use a standard 16 mm tube from DIY shop (it uses as…
This pegboard crimper holder is deep enough for the thicker crimpers used on Dupont connectors and some models with interchangeable crimping bits. In addition to those types of crimp tools it's useful for attaching a variety of RJ45 Cat5…
What you have here is a Pegboard Wire Stripper holder perfect for the little crimper/strippers that come bundled with crimp-on wire ends. See the picture for exact type. Customized version of http://www.thingiverse.com/thing:537516…
All of the compartments are the same size, even though the jaws are all different. I was lazy, and this seems to work well enough. The SN-06WF jaw protrudes a bit too high above the surface and causes any bins that get stacked on top of…
I take weekly injections from 1ml vials and noticed the medicine evaporates if the cap is not clamped down. I found one person made a clamp but it was for 20mm bottles, so I took the design and resized it to meet my needs.
This is a Case for Crimper Die/jaws with content fixation. Suitable for Crimper Die/jaws with holes without cutouts. The sizes of different Die/jaws manufacturers are slightly different. Make sure that your size fits. The distance between…
Коробка Gridfinity 5x2 для сетевого обжимного инструмента RJ45. Хотелось хранить их в ящике,как и другие обжимные клещи.
