1 / 1
Toolcraft PZ-500 Crimper - Die Holder (Expansion) — image 1

Toolcraft PZ-500 Crimper - Die Holder (Expansion)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Needed space for more crimp dies (or bits) for my Toolcraft PZ-500 crimper, so I made these inlays.

Rating
0 / 5
Likes
10
Downloads
50
Makes
1
Views
967
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Bought a couple more crimp dies (or bits) for my Toolcraft PZ-500 crimper, a a tool that can crimp most electrical terminals or connectors. However, the original storage box has limited place for the dies, so I made my own interior with slots for all my 10 dies and the crimper. It is a bit snug to make it fit and you need to cut out the box, but you could also use this model as a start for your own box or tool board, etc.

The holder is split in two part, to fit most printers and has no steep slopes or overhangs. It is designed in Rhino V6 and the .3dm file is included, as well as a .stp file.

Tags