1 / 1
Toolcraft PZ-500 Crimper - Die Holder (Expansion) — zdjęcie 1

Toolcraft PZ-500 Crimper - Die Holder (Expansion)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Needed space for more crimp dies (or bits) for my Toolcraft PZ-500 crimper, so I made these inlays.

Ocena
0 / 5
Polubienia
10
Pobrania
50
Wydruki
1
Wyświetlenia
970
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Bought a couple more crimp dies (or bits) for my Toolcraft PZ-500 crimper, a a tool that can crimp most electrical terminals or connectors. However, the original storage box has limited place for the dies, so I made my own interior with slots for all my 10 dies and the crimper. It is a bit snug to make it fit and you need to cut out the box, but you could also use this model as a start for your own box or tool board, etc.

The holder is split in two part, to fit most printers and has no steep slopes or overhangs. It is designed in Rhino V6 and the .3dm file is included, as well as a .stp file.

Tagi