1 / 6
12 Ga shotshell Roll Crimper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6 pin Crimper
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 545
- Makes
- 2
- Views
- 2,327
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
We have the option either use 2 mm steel pins, which need to be hammered in, or ream the holes to 2.5 mm and screw in M3. If you want a nicer finish you can remove the thread from the screws
6 x M3 8 mm can be longer at most they will stick out or 6x metal pin 2MM
1 x M3 40mm DIN7991 mounting reinforcement
1 x M3 Nut
Print settings:
Filament PLA/ABS/ASA
Layer 0,1-0,2 (I was printing on 0.14)
Perimeters 6
Top /bottom 5
infil 50%
supports I used organics as shown in the photo above
If you like my project you can buy me a coffee. Thanks
https://buycoffee.to/dabal
