35 models
Simple, single 12 gague shotshell holder to give sporting shooters that one last round to complete a stage (when you miss that last critical shot - we've all done it!). This is a remix based on glompos21 design on Thingiverse. I've…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
The 12 gauge shells I modeled seemed to be just about the right size for a neat little stash container, so I modified the 2.75 inch regular brass version, hollowing it out and threading the hull and brass case pieces. I printed mine using…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
After making 12 gauge shells , I thought it would be fun to continue making shells so here are my version of .410 shells. Unlike with 12 gauge shells, I found the actual .410 shells I had measured pretty close to SAAMI spec so I only made…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
A 12 gauge shotgun shell, also known as 12ga or 12G shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 4 lengths: 2 3/4in (most common, 2.75in, 61mm), 3in (67mm), 3 1/2in…
We have the option either use 2 mm steel pins, which need to be hammered in, or ream the holes to 2.5 mm and screw in M3. If you want a nicer finish you can remove the thread from the screws 6 x M3 8 mm can be longer at most they will…
A 5 shotshell holder for my MMS collection of mounts. This can be used with any of the Belt Modules found on my profile or with any other capable mount using Picatinny. This module is designed to be held onto the belt module by tension,…
A 20 gauge shotgun shell, also known as 20ga or 20G shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 2 lengths: 2 3/4in (most common, 2.75in, 62mm), and 3in (68mm). Note:…
not perfect but they hold the shells for hand reloading. i put supports on for the eased edges. takes about 2 hrs to print.
This for trimming off the crimp from a 12 gauge shotgun shell. It uses common utility knife blades. Reverse them and use the other side when it gets dull. It should cut off the crimp about 4mm from the end. Use 3mm screws and nuts for…
A .410 bore shotgun shell, also known as .410 shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 2 lengths: 2 1/2in (most common, 2.5in, 60mm), and 3in (72mm). Note: Shotgun…
Shotgun shell cards used to hold 6 shells that can be attached to most shotguns with hook and loop tape (Velcro). If desired you can also place a loop of paracord to allow you to quickly rip these off the side of the shotgun and replace…
Shotgun shotshell reloading trays for 16 gauge, 20 gauge, 28 gauge, and 410 bore. I couldn't find any small bore reloading trays out there so I made some for my reloading hobby. These are useful for reloading to keep the hulls stable and…
Remixed the original "giant powder funnel" to accomodate MEC loaders where one bottle is shorter than the other (like the stock photo uploaded). Chopped off one side with a flat surface. (Sorry for the poor quality photo of it in-use. My…
INTRODUCING THE TACTI-SHELL FOR ALL YOUR SHELL HOLDING NEEDS Three pieces, print and glue together. Holds 4 shells, which can be oriented either direction based on preference. Designed to prevent shells from falling out while playing…
11/24/25 Update - Added 2.75 inch high brass, 2.75 inch low brass and 3 inch high brass iterations. The 2.75 low brass even has an 8 petal crimp. I was doing some mid-season organization of shotshells in my ammunition cabinet, and started…
A handheld tamping tool used to manually seat a wad in a shotshell hull during hand loading. Also useful to tamp down layers of tight-fitting buckshot within the wad/hull. The Shotshell Wad Ram is a two-part design with a threaded handle…
Simple 12 Gauge shotgun 5 shell carrier. Use strong double sided velcro for attachment. Recommend printing vertically at 100% infill for strongest results. The design allows for sliding shells down or popping them out of the carrier…
Belt holder for your ammunition cartridge box for trap shooting etc. Added a paddle style belt adapter (Tek-Lok). Idea based on https://www.thingiverse.com/thing:1672155 , however made it Bladetech Tek-Lok compatible. Printable Tek-Lok…
Picatinny mounted 2 shotshell holder PETG recommended 100% infill 3 walls 3 base and top layers Supports Normal (snug) 30 degrees Needs: 30mm M5 bolt and M5x0.8mm nut
This is a remix of a 12ga 2 3/4" shotshell I found on Thingiverse (https://www.thingiverse.com/thing:5276446) by Ross2K. I don't have a Thingiverse account, and I can't find Ross2K on Printables, so this is the best way to give him…
Picatinny/1913 rail sidesaddle holder for 5x .45LC or .410 Shotshells. Designed for the Rossi Brawler, but should work with any rail-equipped firearm in .410 or .45LC. Print 1x of this model, and 1x “smallside” from the original. 1x M3…
Printed on Bambu X1C in PETG-HF. No supports used - it will print fine without them. Use raft if you have a bed slinger printer or have issues with ambient temperature regulation. Print Settings Printer Brand: Bambu Printer: X1C Rafts:…
I've printed in both ABS and ASA. The box fits snug, and with flaps folded its fairly tight. No supports needed, glue on the belt clip afterwards. I use black ABS cement (for gluing abs pipe together) to solvent weld the belt clip on.…
Holds five (5) airsoft shotshells in a clip that can attach securely to your belt or webbing. Prevents shells from falling out while running, crawling, or maneuvering. Do you reload with your left or right hand? There are two options to…
These are printable base wads for pistol cartridge shotshells such as those using these shot caps: I tried these as an experiment to avoid the tedium of punching and setting heavy cardstock wads. They actually seem to work just fine, and…
Simple shotshell trimmer - needs a 1/4" screw for adjustments and a scalpel blade for cutting shells. I sugest at least 3 walls (just to hold the scalpel blade), 10% giroid or cubic infill. The scalpel blade must be pressed while hot with…
This model is based off of an oversized 12g shotgun shell that I transformed into a more futuristic looking container. The container threads off on the top and features large, easily printed threads. I have found that Silk PLA makes for…
This turns the SliX Shotshell Checker Sizer Combo into a table or cart mounted vice to easily add to a SASS legal taper crip to your shells. Much easier than doing it by hand. As shown, printed in PETG-CF for longevity, test prints in PLA…
This model was made with the waterfowler in mind. I wanted a place for the essentials while out duck hunting in the boat..... COFFEE AND AMMO! I have added a mirrored file so you can print one for both sides of the boat. Printed in PETG.
Lid for MTM 25 Round Shotshell box, used to store 18650 cells. Prevents the cells from moving when the box is flipped.
This version has been modified with Ghost Shotshell holder pro8 like mounting holes in the middle. For mounting of the holder I've used M5x16 inserted through the fork and a M5 nut on the holder side. Printed for ASA and seems to work…
Picatinny/1913 rail sidesaddle holder for 5x .45LC or .410 Shotshells. Designed for the Rossi Brawler, but should work with any rail-equipped firearm in .410 or .45LC. Print 1x of this model, and 1x “smallside” from the original. 1x M3…
This version has been modified with Ghost Shotshell holder pro8 like mounting holes in the middle. For mounting of the holder I've used M5x16 inserted through the fork and a M5 nut on the holder side. Printed for ASA and seems to work…
Printed on Bambu X1C in PETG-HF. No supports used - it will print fine without them. Use raft if you have a bed slinger printer or have issues with ambient temperature regulation. Print Settings Printer Brand: Bambu Printer: X1C Rafts:…
