SliX Shotshell Checker Sizer Combo Vice
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vice mount for SliX Shotshell Checker Sizer Combo.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 31
- Makes
- 0
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This turns the SliX Shotshell Checker Sizer Combo into a table or cart mounted vice to easily add to a SASS legal taper crip to your shells. Much easier than doing it by hand.
As shown, printed in PETG-CF for longevity, test prints in PLA seemed to work fine but I don't know how long it will stand up.
I used this push-pull toggle clamp: https://www.amazon.com/dp/B07214XRR1?ref=ppx_yo2ov_dt_b_fed_asin_title
SliX Shotshell Checker Sizer Combo can be found here: https://www.slixprings.com/proddetail.php?prod=SliX-Shotshell-Checker-Sizer-Combo
Simply both the shell holder on the end with the included bolt and nut, then install you checker/sizer into the die holder and line up to screw both down to the surface you want to use.
The die holder requires supports.
Note: tolerances are intentionally tight as this takes a fair amount of pressure. Depending on your printer you may have to scale a bit to make things fit.