SliX Shotshell Checker Sizer Combo Vice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vice mount for SliX Shotshell Checker Sizer Combo.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This turns the SliX Shotshell Checker Sizer Combo into a table or cart mounted vice to easily add to a SASS legal taper crip to your shells. Much easier than doing it by hand.
As shown, printed in PETG-CF for longevity, test prints in PLA seemed to work fine but I don't know how long it will stand up.
I used this push-pull toggle clamp: https://www.amazon.com/dp/B07214XRR1?ref=ppx_yo2ov_dt_b_fed_asin_title
SliX Shotshell Checker Sizer Combo can be found here: https://www.slixprings.com/proddetail.php?prod=SliX-Shotshell-Checker-Sizer-Combo
Simply both the shell holder on the end with the included bolt and nut, then install you checker/sizer into the die holder and line up to screw both down to the surface you want to use.
The die holder requires supports.
Note: tolerances are intentionally tight as this takes a fair amount of pressure. Depending on your printer you may have to scale a bit to make things fit.