12 Gauge Shotshell Stash Container
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.55 – €0.67 net (excluding VAT)
For file: 12GA_Stash_Container_0.4n_0.2mm_PLA_COREONEMMU3_33m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.61 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 33 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A screw together stash container modeled like a 12 gauge shotshell.
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 61
- Makes
- 1
- Views
- 237
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The 12 gauge shells I modeled seemed to be just about the right size for a neat little stash container, so I modified the 2.75 inch regular brass version, hollowing it out and threading the hull and brass case pieces.
I printed mine using a .20mm layer height. I got a little stringing on the internal threads in the hull, I haven't quite figured out how to solve those in the design process. In my testing I have found that after working the threads a few times, everything works great even with the stringing. I suspect that using a smaller layer higher might solve it, I'm just not patient enough to test.
I may make additional variants on this if there is interest.