12 Gauge Shotshell Stash Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screw together stash container modeled like a 12 gauge shotshell.
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 237
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The 12 gauge shells I modeled seemed to be just about the right size for a neat little stash container, so I modified the 2.75 inch regular brass version, hollowing it out and threading the hull and brass case pieces.
I printed mine using a .20mm layer height. I got a little stringing on the internal threads in the hull, I haven't quite figured out how to solve those in the design process. In my testing I have found that after working the threads a few times, everything works great even with the stringing. I suspect that using a smaller layer higher might solve it, I'm just not patient enough to test.
I may make additional variants on this if there is interest.