Shotshell Wad Ram
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.57 – €0.69 net (excluding VAT)
For file: ShotshellWadRam-Handle_0.4n_0.2mm_PLA_MK4IS_32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 31.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A handheld tamping tool for seating wads in shotshell hulls, when necessary, while hand loading.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 174
- Makes
- 1
- Views
- 797
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A handheld tamping tool used to manually seat a wad in a shotshell hull during hand loading. Also useful to tamp down layers of tight-fitting buckshot within the wad/hull. The Shotshell Wad Ram is a two-part design with a threaded handle and ram.
Currently, only a 10/12 gauge ram is available, but I have plans to add additional interchangeable ram rods for other gauges (popularity of this model will determine how quickly I get around to doing so).
Printing:
The handle and ram should be printed as separate objects (although they can be printed at the same time if you prefer a solid-color tool). Optional: increase infill density of the ram to 25%.
Print both parts in the orientation shown to the right; no support required when printed in this orientation.
Assembly and Use:
Simply thread the handle onto the ram and tighten (finger-tight is sufficient). Use the tool to seat your wads (and if necessary, the buckshot, or gummy bears, or whatever else you might be loading) in your hulls.