Counting matching models…
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
'Making of' video: Stresstest your 3d printer by downloading and printing this tiny print-in-place Surprise Egg for free! Both the steamroller and the egg was each designed to be print-in-place without any need for support structures. The…
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for PETGSource material: PET
Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games
Print approx. €6.09–€7.44 excl. taxPreliminary estimate for PETGSource material: PET
Info: remixed Robin_Pe rude finger cap found out, that his version printed at 97% with 0.4mm nozzle works great for me (Prusa MK3S+) Not for presta valve ! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Manabun design is very accurate. I made quick remix for non-slip pads that I have at home. Dimensions 18 x 5 mm. Pads are very tight in holes. Print with 3 perimeters and 15 % lightning infill.
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
The double cone object rolls UP the ramp due to their physical properties. To learn how this works, watch my YouTube video explaining everything here as I designed this for that video :) Please heart this design if you like it as it helps…
Print approx. €6.93–€8.47 excl. taxPreliminary estimate for one variant
Imprints clay with a beautiful leaf texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20%…
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for one variant
This is a simple wall-mounted toilet paper roll holder. It is mounted on the wall with two screws but has also enough surface on the back to glue it to the wall. This holder supports up to three rolls of toilet paper with a diameter of…
Print approx. €6.87–€8.40 excl. taxPreliminary estimate for one variant
Imprints clay with a lovely splash texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
Print approx. €3.13–€3.83 excl. taxPreliminary estimate for PETGSource material: PET
The wheel can make one of the joysticks not move all of the way, so if your game supports it you might want to change the controls. You will need a 608 bearing for the wheel. If you are going to print one I recommend the one by zimo .…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
Imprints clay with a dainty leaf texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the roller…
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Hello there! I recently moved to another country, I'm used to roll cigarettes with this thing, but I couldn't find it here. So by the photos and memory, i created this version, similar to original, fully printable :) I prepared gcode…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Based on empirical studies, I discovered that the mini Pro Controller (that I bought on AliExpress and that works absolutely well for my 3yo son) is 82.6% of the original. You can use my gcodes, or you can go to the original model…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
A useless box that uses a single moving arm to press multiple switches. Partslist and build instructions: https://blog.hirnschall.net/diy-useless-box/ Video of the box in action: Print using a medium quality preset (0.2mm layer height).…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Modifier File to add fuzzy skin to the handles only. Not perfect but works quite well. The world coordinates for the modifier are X: 0, Y: 4.30 and Z: 8.39. Takes some time getting it into the right place so make sure it looks like the…
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for one variant
Bonjour à tous. Je vous partage de quoi faire des parchemins explosifs tiré du manga Naruto … qui n’explosent pas … désolé …. Dessin trouvé sur le net. Pour la modélisation, j'ai fait avec Paint 3D pour retoucher l'image et séparer les…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant
No support necessary. Used a 0.12 layer and 15% infill to make more light. Ender 3 pro test. Probably work on other Xbox controller but I don't have one to test. Work well in PS4 and PS5 Dual Sense Controller.
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
Credit on Printables to: @ IDVx Consulting @ GunplaMark I have remixed and simplified the prior designs above: Revised the filament exit Revised the base and rollers to be one piece with integral desiccant bin. Left off the hydrometer and…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) A holder designed specifically for mounting on the Qube 540 PC case, allowing you to conveniently keep your gamepad within easy reach. 🔩 Design The model consists of two parts that fit together –…
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for one variant
I created these covers to protect our Nintendo Switch Pro controllers while traveling. I noticed that some controllers had drained batteries upon arrival because the buttons were frequently pressed in the luggage, causing the controllers…
Print approx. €2.02–€2.46 excl. taxPreliminary estimate for PETGSource material: PET
Instructions: For most of the aspects, refer to the picture above. For the seats, the seats with a rectangle on the bottom get inserted into the middle two sections (two seats back to back) and for the ends, insert the seats with a circle…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
This holder is an exact match to the original. It is compatible with HP DesignJet T1300 plotters.
Print approx. €6.39–€7.81 excl. taxPreliminary estimate for one variant
Scroll Art in an Isosceles Triangle
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for one variant
A simple, yet curvy, dualshock stand. Includes a slot to route a charging cable. Printed mine in pistachio PETG with 2 perimeters and 25 % gyroid infill, but as its overbuilt it can be made with practically any material and reasonable…
Print approx. €8.67–€10.60 excl. taxPreliminary estimate for PETGSource material: PET
After remixing the pro controller holder for the first time with a Zelda - Tears of the Kingdom look (find this one here: https://www.printables.com/de/model/826335-nintendo-switch-pro-controller-stand-zelda-totk-re) I decided to do some…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
This 3D-printed paper towel holder is both functional and stylish, designed to bring order and practical storage to your kitchen. Made from PLA, a lightweight and eco-friendly material, it offers both durability and a modern, minimalist…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
Less carrying. More rolling. Move It! adds wheels to items that are awkward to carry. Place the rollers beneath the edges of your item and, when needed, secure them with a 25 mm tension strap. The ribbed, L-shaped body supports the corner…
Print approx. €7.05–€8.61 excl. taxPreliminary estimate for PETGSource material: PET
I created this adapter for mounting my tp-link Omada Controller OC200 in a server rack. The controller simply snaps into the printed frame without any additional screws or other fixture. For mounting small parts inside a 19'' rack I use…
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for PETGSource material: PET
EN: This is a dock I have designed for our ABC Design Stroller “Salsa 4” or better said for the carrycot that is part of the set. I wanted to build a table for the living room with the docks attached on the top to easily use the carrycot…
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET
grips for the nintendoswitch procontroller, 3D scanned and smoothend
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
When our little one had trouble sleeping, the gentle rocking motion in the stroller always helped. Annoying was only that he was always awake when the road was too perfect. With my rocking support you have reliable light rocking motion at…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Ploopy's Github has multiple versions of the scroll wheel across the STEP and STL files. I struggled finding the most current version, but now I have gathered all three parts and posted them here. As of 02-Jan-2023, these three files are…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Rolls Royce logo & writing that I made because I love cars
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
The model is a variation of Storage for 22mm Rollerblade & Rollerskate Bearings by “kevsparky”. The original holder was upgraded with skewers so it will be easier to insert bearings into the corresponding slots. The lid was added as well.…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
Horizontal blinds controller - no more hanging chains on windows. To open the blind, just turn the controller. To connect both parts just insert a piece of filament. You can choose two designs of rotate part. The static part is the same.…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
The Revolutionary Musical Keyboard and Multi-Function Controller (RMKMC) is a versatile 3D printed model that showcases a unique blend of music, technology, and 3D printing at its finest. It houses 8 keys, each assignable to whatever…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
The TC420 and TC421 are very nice and relatively cheap LED controllers for fish tank / aquarium lights. However, there is no cover at the connections, so I created a two-piece cover. The lower part will be screwed in permanently. The…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
I have some old rollerblade rollers. on those i needed to change the buckle strap. But the strap is discontinued. So i maid one. Printed in pla, in extrem detail to have as much layer as possible to ensure the strengh. Unsaw the old…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
I made this for a friend's RV-8, after discovering that a case he found for the original controller board was too small. This one fits the current board from FLYLED's (the blue board) and was printed on my Prusa Mk.3s in PETG with the…
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple, easy-to-use, easy-to-print convolute or parallel tube roller for 1.5" inner diameter kraft paper tubes. The roller has separate, adjustable guides that make wrapping the paper around the form much easier as well as a…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
A holder to support an expansion adaptor for developing designs for microcontrollers. This stand keeps the expansion adaptor from scratching the work surface and pins from shorting to each other. Fits boards that are 70X90 mm such as:…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for PETGSource material: PET
Print in place no support if big frame layed down, free to remix, choose quality by needs.
Print approx. €8.15–€9.96 excl. taxPreliminary estimate for PETGSource material: PET
If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for one variant
Introduction This is a complementary model to the LED Strip Holder for the LED controller of Huemihui LED Strips . Additional Parts Required M3x4 screws (e.g. M3x4 out of your Prusa Enclosure Kit) 2 regular M3 Hex Nuts (e.g. M3n out of…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
sorry for low effort pic
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
This is a game controller stand with a dragon on the front. You can do a color change by Z height to get the stand in one color and the dragon in another. You do not need a multicolor printer. .stl, 3mf and gcode included.
Print approx. €2.43–€2.98 excl. taxPreliminary estimate for one variant
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
STYR-01 is a compact and charming rolling robot that fits in the palm of your hand. It features a passive stabilization system using an internal counterweight. Thanks to this mechanism, its head always remains upright while rolling,…
Print in Place Bearings with real rolling elements. ! ATTENTION ! - these models are hard to print and fail easily. - your printer MUST be able to print gaps of 0,1mm width - clean your printbed - make sure, great adhesion is possible -…
The best Xbox controller stand is minimal and nearly invisible — keeping the focus on your controller, not the stand (🇦🇷 Designed in Argentina by @impuestito_org ) – THIS IS THE ORIGINAL DESIGN ✅ Minimal design. No supports needed. Weighs…
I remixed agepbiz’s XBOX Controller Stand because it was amazing, while respecting the design to make it suitable for a Nintendo Switch Pro Controller. The remix source is here.…
I redesigned the v2 version to be more rounded and sleek. Product Introduction: Hello everyone! I'm excited to share with you my 3D printed stand design for the PS5 controller. This stand is perfect for storing and displaying your PS5…
Great small gift idea for bike lovers or demo print for newcomers. Prints fast & Easy. The ones is the pic are 0.4Lh. If you feel this is too small for your liking, feel free to modify scale in your slicer software. This is very quick and…
PS5 Dualsense Controller Stand
TEST FIT TEST FIT TEST FIT Head here for the full Xbox design PS4 Version Available Here PS5 Version Available Here Switch Version Available Here Print and test controller clips to make sure they fit. 4 files provided here: 1: STEP file…
This model will require some supports between the legs, under the hands, zipper and the head as well. Add plenty of infill to keep it sturdy! I recommend getting the bottom plate for stability, but I have not been able to test this print…
An easy FDM printable stand to hold your PS5 controller in the look of a PS5. There are already some models out there but they don't quite hold the controller as snug as I'd like plus the printing or the assembly were often times a…
The Steam Controller needs a dock, this our my take on it. It is extremely close to the version we will release in June, except for three things: It lacks the weight to properly stay in place while removing the controller from the magnet…
A haunting skull emerges from melting tentacles to create a dramatic floating display for your PS5 controller. Other controllers fit, but not as snugly as the PS5. This dark, sculptural stand blends gothic horror with modern gaming…
This is the filament runout detection roller guide for the Creality Ender 3 S1 printer as seen in the following video: What you will need: ► QTY (1): M4 socket head screw, anywhere from 6-10mm long will work ► QTY (1): M3 brass heated…
Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…
Remix of the Original Solder scroll to fit standard spools
This upload contains CAD files for the external shell (surface topology) of Steam Controller and the Steam Controller Puck, under a Creative Commons license. This includes an STP model of each, an STL model of each, and an engineering…
A remix of kiwithreed's design from Thingiverse . Modified the following: Removed headphone holder. Simplified the design so it prints with drastically less filament. 3M Command Strip (Medium) compatible. Recommended print settings (.3mf…
Rolling Paper Bench Stand ***Update - Two new versions have been added! There are now three bench designs, the Rocking Bench, the Arm-Rest Bench, and the OG Paper Bench. Try them out and let me know what you think!*** These 3D-printed…
Un remix donde añadí el logo de PlayStation
My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…
Xbox controller stand with cutouts for the paddles on the back. Best fits the elite series 2, but because of the slightly different shape from the series controller originally used by the OP, it's not a perfect fit. Original elite…
After posting my first remix, the XBox Controller - Starfield Edition , I realized that others might want different games shown instead of the one I made. So I redesigned the model by placing a couple of voids in the middle of the stands,…
Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…
A quick print to upgrade the standard Ender 3 knob. Snaps on the original knob. The inner diameter of the cap is 25.85 mm UPD: another version to completely replace the control knob Print instructions Category: 3D Printer Parts Print…
This is a roller bearing style spool holder that replaces the oem spool holder, in the same location as stock. it will accommodate standard size spools up the 75mm wide with a 40mm or bigger hole diameter. The roller and the body each…
Please note! Xbox one and series controllers use slightly different battery covers Please make sure to choose the right one! Using the wrong one can end up with the tabs breaking in your controller (which shouldn't be dangerous but will…
THX @qgepbiz for the original, which inspired me for this remix Minimalistic Xbox Controller Stand von agepbiz | Kostenloses STL-Modell herunterladen | Printables.com Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip…
Texture rolling pin for clays and epoxies. Can be used to create a pattern that's perfect for brick walls or floors. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking, wet the…
This is my new Anti-Gravity Roller! Yes, it is right in the name! The roller rolls against gravity (At least it seems to until you look close enough) If you liked this model, check out my other illusion model: THIS IS THE LINK This is…
Here's another modification I've done to be compatible with the Skadis Pegboard! The easiest was putting the hook on. The hardest was making sure every controller I had was fully compatible. I used the modified ps4 controller holder as a…
For this to work you have to download the casing from my Business card Embosser (LINK!) For al plant lovers: Monstera leaf / Plant pattern Rollers for the Business card embosser! (Only rollers, no casing) More rollers will be added in the…
Modeled to fit any controller with the same dimensions as the base PS5 controller. The Playstation 5 DualSense Controller has a height of 4.2” (106 mm), width of 6.3" (160 mm), depth of 2.6” (66 mm). If your controller does not fit those…
I made a steel wheel with a deep dish for my tt02. I made these wheel 52mm high, 26mm deep with and of set of ET02 (2mm positive) to suit my Tamiya TT02 and use original tires. The wheel is designed to be printed face up with supports at…
Adjusted the design from @seb_241995 to fit Mitutoyo calipers with the side scroll wheel. Fits perfect !!
A quick and easy-to-print controller stand for your new Nintendo Switch 2 Pro Controller with minimal waste. These filaments best match the Switch 2 color scheme: Sunlu or Jayo PLA Sky Blue (very close!) Sunlu or Jayo PLA Sunny Orange…
Basic / Minimalist PS1 PS2 Controller stand I designed. Couldnt find one that i could print and liked using my Ender 2 Pro ( small Bed ) just print all 3 PCS, no supports needed at all ( just orient them right ) and snap together. i had…
Inspired by a design from Nicholas Piegdon: https://www.youtube.com/watch?v=8qTx_9HK7IM Used 3D scans from: https://bitbuilt.net/forums/index.php?threads/ps2-dual-shock-2-controller-scan.5088/
This is another version of my controller stand for the PS4. Meant to fit any controller matching the dimensions of the PS4 controller. The DualShock 4 Controller has a height of 3.94” (100 mm), width of 6.34” (161 mm), depth of 2.24” (57…
This is my version of a hose guide system, designed to print in two separate pieces. I wanted to avoid using any hardware because, realistically, I would probably forget to remove it at some point and end up destroying it. So I decided to…
Fully printable and customizable roller press for various usage: Papercraft Baking Candle making from wax Pottery making from ceramic clay and others that You find out ;-) Design, make and share Your own rollers design/structure. Basic…
Video demonstrating the touch controls / adjusting brightness https://www.youtube.com/watch?v=x7zqOPEqBCw This project is for the 2.8" ili9341 TFT LCD and Touchscreen . The ESPHome code for this project, which is a clock showing inside…
Print. Cut. Clean. Place. It's that simple.
A stand for two ps5 controllers. This model is a remix from a model for one controller from La Guía del Mando (can't reference it as it has since been either switched to draft or has been deleted). I did a few modifications such as…
This is a controller shaped case for the BBC Microbit with a detachable battery holder that fits the standard 2xAAA (JST-PH) battery pack for the Microbit. The original design for the controller case was done by Guillermo Melantoni…
Remix of ManubunLab stand for the Pro Controller. ManubunLab's version . I added player number indicators to the original model and scaled the width to fit the new Pro Controller 2. The stand is NOT modelled for the Pro Controller 2, but…
Onimask PS5 DualSense Controller Stand
This is a re-make of Thingiverse user Stridershouse's design. I redesigned it to have no logos, have a smaller footprint, and to mount with command strips or any other adhesive-based solution instead of using screws. There is a…
TEST FIT TEST FIT TEST FIT Head here for the full PS4 design Xbox Version Available Here PS5 Version Available Here Switch Version Available Here Print and test the controller clip to make sure it fits. Two files provided here: 1: STEP…
There are many versions of that puzzle out there with texts that are more or less fitting for an occasion. Design This one is different. It allows you to chose any text you like in any font you like. Also the inner parts, those you see…
A foot massager design that has been used in the Far East for years. With 15% filling, 3 outer walls. PLA or other filaments can be used (except TPU). Loaf and massage rollers must be pressed horizontally and support is required. Put…
