1 / 8
Slica dry box for Bambulab AMS fitting the roller repairs suggested by bambulabs
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the dessicant boxes with a little grab piece at the top - and made to fit with the repair fix for broken roller
- Rating
- 4.973 / 5
- Likes
- 216
- Downloads
- 2,374
- Makes
- 45
- Views
- 9,193
- Reviews
- 37
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit.
I also added a little grabber thing at the top to pull it out.
It's based on the already remix of SwadDad with the spacer for the humidity sensor.
My settings:
- Print in ABS (for high temp)
- Use the standard 0.20mm profile with all default settings
- except used 4 wall loops (making it solid)
- No brim
- It prints fine on my side without support.
- The Lid is “on the larger side of things” but since it slides over the “grip” thing I think it's ok.
- If you want to make it tight, in your sliced, scale it down just a bit (less than 1%) - you can scale on the x and y axes only if you want.
Print files:
- I've added several formats including source files if anybody wants to use.
- If you are just looking to print, use the ones obj
- print 3 times the lid
- 2 times the box
- 1 time the box with humidity sensor (if you want that) - otherwise print another standard box.
Humidity sensor
- You need something like this one , a 44mm X 44mm X 13mm hygrometer. It's normally cheap stuff.
News:
- New model with frame for the sensor. 17/12/2022 - Madmax asked if I could add a nesting box for the sensor. I did based on specifications used by MediaMan3D . It's the same format as the other ones - same lid.