Slica dry box for Bambulab AMS fitting the roller repairs suggested by bambulabs

My AMS roller supports cracked.  There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore.  So I made it back from scratch with groove to fit.

I also added a little grabber thing at the top to pull it out.  

It's based on the already remix of SwadDad with the spacer for the humidity sensor. 

My settings:

• Print in ABS (for high temp)
• Use the standard 0.20mm profile with all default settings
  • except used 4 wall loops (making it solid)
  • No brim
• It prints fine on my side without support.
• The Lid is “on the larger side of things” but since it slides over the “grip” thing I think it's ok. 
  • If you want to make it tight, in your sliced, scale it down just a bit (less than 1%) - you can scale on the x and y axes only if you want.

Print files:

• I've added several formats including source files if anybody wants to use.
• If you are just looking to print, use the ones obj
  • print 3 times the lid
  • 2 times the box
  • 1 time the box with humidity sensor (if you want that) - otherwise print another standard box.

Humidity sensor

• You need something like this one , a 44mm X 44mm X 13mm hygrometer.  It's normally cheap stuff.

News:

• New model with frame for the sensor.  17/12/2022 - Madmax asked if I could add a nesting box for the sensor.  I did based on specifications used by MediaMan3D .  It's the same format as the other ones - same lid.