1 / 7
DEEP DISH STEEL RC WHEEL RIM 1:10 SCALE 52 X 26 12 MM HEX STEELIE SPARE TAMIYA TT 02RADIO CONTROLLED CAR — image 1
1 / 7

DEEP DISH STEEL RC WHEEL RIM 1:10 SCALE 52 X 26 12 MM HEX STEELIE SPARE TAMIYA TT 02RADIO CONTROLLED CAR

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Steel type wheel with a deep dish for rc cars

Rating
5 / 5
Likes
176
Downloads
1,329
Makes
0
Views
4,976
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I made a steel wheel with a deep dish for my tt02.

I made these wheel 52mm high, 26mm deep with and of set of ET02 (2mm positive) to suit my Tamiya TT02 and use original tires.

The wheel is designed to be printed face up with supports at 0.2mm layer height and 20% infill. The bolt hole in the center will have 1 thin layer you can either push directly onto the axle of the car or use a drill bit, knife or screwdriver.

Printed with PLA+ on my ELEGOO NEPTUNE 2S using PRUSA SLICER. 

basic settings 

0.2MM Layer height 20% Infill. Vertical Shell Perimeter at 3, GRID Infill, ALIGNED Seam, DETECT BRIDGING, THICK BRIDGES, EXTRA PERIMETERS, VERTICAL SHELL THICKNESS

Tags