1 / 7
DEEP DISH STEEL RC WHEEL RIM 1:10 SCALE 52 X 26 12 MM HEX STEELIE SPARE TAMIYA TT 02RADIO CONTROLLED CAR — zdjęcie 1
1 / 7

DEEP DISH STEEL RC WHEEL RIM 1:10 SCALE 52 X 26 12 MM HEX STEELIE SPARE TAMIYA TT 02RADIO CONTROLLED CAR

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Steel type wheel with a deep dish for rc cars

Ocena
5 / 5
Polubienia
176
Pobrania
1329
Wydruki
0
Wyświetlenia
4976
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

I made a steel wheel with a deep dish for my tt02.

I made these wheel 52mm high, 26mm deep with and of set of ET02 (2mm positive) to suit my Tamiya TT02 and use original tires.

The wheel is designed to be printed face up with supports at 0.2mm layer height and 20% infill. The bolt hole in the center will have 1 thin layer you can either push directly onto the axle of the car or use a drill bit, knife or screwdriver.

Printed with PLA+ on my ELEGOO NEPTUNE 2S using PRUSA SLICER. 

basic settings 

0.2MM Layer height 20% Infill. Vertical Shell Perimeter at 3, GRID Infill, ALIGNED Seam, DETECT BRIDGING, THICK BRIDGES, EXTRA PERIMETERS, VERTICAL SHELL THICKNESS

Tagi