Liczymy pasujące modele…
This is a practical experiment of 3D printed bearing, https://www.printables.com/model/441865-3d-diy-gro Please refer to photo for assembly instruction. Chassis require a large print area, at least 300x300. Shut with machine screw: 10-32…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Bring the excitement of Formula 1 to your desk with this fun and unique cartoon-inspired F1 car! Designed with exaggerated proportions and a playful aesthetic, this model captures the spirit of the next generation of Formula 1 cars while…
Wydruk około 2,68 €–3,28 € nettoWstępna wycena jednego wariantu
Just a remix for a different range. Starts at 260 on bottom, and then decreases in 5 C intervals to 230.
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, I designed this bottle holder to keep my large 1.5l Camelbak bottles in reach, without the danger of throwing them of my bedside table at night. It fits 1.5l bottles up to 100mm and large cups that are at least 100mm. Bottles that are…
Wydruk około 2,36 €–2,88 € nettoWstępna wycena jednego wariantu
[EN] Dead man's security repair kit for Grillo G126D tractor. This part could be fitted on other old tractors from this brand. Printing tips: 30% infill (cubic), 3 perimeters, 3 layers top and bottom, supports like the photo [FR] Kit de…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
PF2026
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Print face down with a textured plate for the best result. PLA might warp under the heat of a hot cup or mug, print PETG for best results. Print 95mm wide and use adhesive cork backing to grip the table found in the link below.…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A compact and satisfying G26-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe, non-functional,…
Introduction This is a simple PC mainboard frame/tray system intended for open-air or custom enclosure PC builds. The intent is to support a broad variety of mainboards from iTX to so-called EATX with modules that fasten together with M4…
Amazing for Decoration and an overall fun print! PS: your new lucky trophy!
Late-WW2 Era German Fighter Jet Messerschmitt Me-262
If you feel like it, here is a donation site for our team and would be very grateful if you helped out (we really need money rn): Click here to donate PRINT DRONE LAUNCHER V3 for my latest design FOR DRONE LAUNCHER V3: It uses a half…
A compact underbarrel flashlight add-on for the G26 Fidget Keychain, designed to give your slide-action toy a more tactical look. Simple to print, easy to assemble, and fully compatible with the original model. No glue required…
Node Robot Platform using ESP8266 for robotic development. This project is inspired by the SMARS robot but use ESP8266 as it heart for out of the box remote control. Hardware Needed hardware (all the link is for reference): 1x ESP8266…
This model is compatible with the lego system.
I purchased a LoRa module from Amazon to get started learning about Meshtastic, and I realized after receiving it that I needed an enclosure for it. I didn't realize how easy it would be to set up. I would assume if you're here you…
Updated wire channels and added a single file for download. My project contains six plates that combine to the full instrument panel of a Cessna 172 cockpit with the necessary bezels. The panel is placed on top of an LCD screen-monitor…
For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…
Wanted to cover the Vents under the driver and passenger seats of my 2026 Tesla Model Y Juniper Purchased 2 covers which did not fit as indicated. Decided to 3DPrint my own. Simpy Print and slide down from the top. The attached images…
This model is compatible with the lego system.
Presentation This center console tray for the new model Y Juniper 2026 (delivered in 2025) also fits the model 3 Highland 2024 (deliveries started late 2023). For now, it is mostly a concept. If you think of a better idea to integrate…
The following PDF contains custom settings that work better than the default profile included with the Flashforge Creator 5 and Creator 5 Pro. Most of these settings will also work with the Flashforge AD5X and possibly other printers such…
My Smarthome Roomsensor Parts: Wemos D1 mini BME 280 BH1750 M3x6mm Screw I Use Home Assistant as Server and ESPHome to control the Sensor I send the Wemos into deepsleep and wake it every 5min for 30sec (dont forget to connect D0 and RST)…
A 3D printable, GitHub infused, wifi enabled smart light powered by WLED and compatible with Home Assistant For full assembly and wiring instructions see https://github.com/martinwoodward/octolamp Revised Jun 26 2023: Added holes in black…
my own creation for hex wall organiser that can be used for holding a blade fuse box or something else
I have been FDM printing mini's for a decade. I am publishing my latest settings. These are for MK4 but the settings should apply to any other printer. Updated June 2026: I made some changes as well as argued with AI for further insights.…
This model is compatible with the lego system.
Change History Update (4-06-26): (Optional) Added a blank analemma plate for those who want to experiment with their own analemma curves & text. Check the file folder: Blank Analemma Plate. Update (12-07-26): The file…
Atari 2600 Display Stand About This display stand is made to hold the Atari 2600 Console in an upright position while providing you with a slot to stow the hardwired cable and two slots to display cartridges in either an upright or…
I got this model from GrabCAD, made by Blend Me Now, but resized to the real size of the ESP8266. I hope I helped with your projects, guys!
I created a base for a vintage sewing machine (designed for a Pfaff 262) so that I can put the flat bed sewing machine on my desk. This is a very improvised design, not a lot of though went into it. Materials required: Silicone pads for…
AI Make Now generation plus, I added the numbers with my own hands and edited the pedestal myself. Design This filigree horse is created in the spirit of ornate ornaments, emphasizing its graceful lines and grace. Appointment It is…
Wanted to cover the Vents under the driver and passenger seats of the Tesla Model Y Juniper. I liked the original I've found, but feel it not strong enough, so I built a new one. Print instructions PETG 20% fill denisty Gyroid fill…
ESP8266 + BME280 enclosure with quick-slide mounting base and printable board lock for a tool free installation (not including a screw or two for the enclosure mount). I flipped the ESP8266 board inside the enclosure so the chips were…
This is a 3d version of the 2026 youth theme "Walk With Me" Moses 6:34 for the Church of Jesus Christ of Latter-day saints. One version the sun is round on the bottom as well as the top. The other version is rounded on top, but flat on…
Protect your console cart port from dust ect. Use supports, obviously. I do 3 walls minimum on all prints. 15% Infill.
I found these cheap " ESP8266 ESP-12S WIFI Microcontroller WS2812 LED Strip RGB Dimming Controller Support WiFi, infrared wireless control" which would be great for a small at-home WLED project so I designed an enclosure to help hide…
This remix includes a new base design for the whimsical dodecahedron lamp that allows it to work with an A19 E36 bulb instead. I already had a Wi-Fi enabled LED bulb handy which I thought would fit well into this design . So I modeled a…
I have always been a fan of day fishing/hiking trips where staying light and organized is essential for a good experience. This model is a 2026 update to my favorite compact lure box, refined through personal use and feedback to fix…
Another holder for the moonlamp with a M26 thread. Suitable for the 8inch remix model: https://www.thingiverse.com/thing:4930753 Prints without supports
Esp8266 case for the new Node Mcu V3
The microcontroller can be mounted with or without pin header. Additional for the terminals you can print spacers to place them in right position. Useable terminals:…
Print with TPU, top side facing print bed; no supports required. If you have a bike with different display size, feel free to modify attached FreeCAD file.
The smallest case set for BME680 + ESP8266 This set is made for the minimal footprint when using a BME680 sensor connected with soldered cables to an ESP8266 controller. The model is optimised for ease of usage with both boards fixed…
2 варианта исполнения: просто кейс кейс с выемкой под переключатель Пример переключателя https://www.ozon.ru/product/dvizhkovyy-vyklyuchatel-mini-pereklyuchatel-pitaniya-dlya-arduino-maketnyh-plat-diy-i-elektroniki-1323063165/
This is the case of my self-designed window sensor. It is based on an ESP8266 and lasts several years on one battery charge. I designed the board especially to get the deep-sleep under control. In my youtube-video (…
I wanted to find a clean way to charge my phone while on a longer drive and connected to wireless Android Auto. As the built in wireless charger seems not to be able to charge the phone while using Android Auto, another solution was to be…
The microcontroller can be mounted with or without pin header. Additional for the terminals you can print spacers to place them in right position. Useable terminals:…
The microcontroller can be mounted with or without pin header. Additional for the terminals you can print spacers to place them in right position. Useable terminals:…
Remix of https://www.printables.com/model/166887-volume-spacer-for-fox-float-shocks for my 2026 Fox Trunnion
26700 BATTERY CELL PACK Item Description: This custom 26700 battery cell pack features four high-capacity sodium cells, offering a versatile foundation for DIY energy builds. Whether you're targeting a 12V DC setup or combining multiple…
Since I couldn't find an accurate CAD model for the ESP8266EX anywhere online, I decided to model it myself. I'm sharing it with the community so you can use it for your own IoT and electronics projects! This model is perfect as a…
This is a box for an esp8266 based pwm led controller
Stand for 4 atomizer heads (up to 26mm diameter) My equipment and used settings/material: Printer: Ender 3 v3 Plus (0.4mm nozzle) Walls : 2 Infill: 15% (gyroid) Layer height: 0.2mm Filament: eSun grey PLA+
Rectangular Cable Hook for SCHLEPP Camera Carts (2026 Design). The rectangular design reduces leverage. Recommended filament: PLA+, PETG, ABS, PA6 or PA12. Orientation: Print flat . You may also have a look at our rounded 2026 design ;)…
Case for SX1262 LoRa HAT Module. Consists of Base and Top.
Why I made these: Last year, I made some storage trays and organizers, aiming for a sci-fi theme. I fell a bit short in my opinion, so when I was reorganizing my work space around my new printer, I decided to revisit them with another…
Pas envie de laisser vos câbles et votre interrupteur se balader sur la table ? Support à visser conçu pour cet interrupteur à bascule 26X12 ,afin de réaliser un montage propre et sécurisé en prototypage. ✔ Maintien stable du module ✔…
For back to school or for avid readers, here's the first set of Atari 2600 games bookmarks! I carefully recreated the design on the spine of the boxes that the game cartridges came in. This second set consists of my nine favorite Atari…
WiFi Pixel Controller for WS2812 LED strips and fairy lights based on WLED firmware. Project description: https://www.maltepoeggel.de/?site=pixelcontroller Circuit board at Aisler: https://aisler.net/p/GZWNWPUL Circuit board at OSH Park:…
I created this for my Grade 7 graduation.
I made this for my Grade 7 graduation.
This is an easy print using Silver PETG. I used supports under the R and L track inserts.
The arms need to be glued in. Can be printed laying flat.
Ready for tinkering? Here is the plate to organize the Coral Board, while keeping all of its IO pins accessible. Additionally, you can use an arducam, with this neat board-specific stand (just remove the helper disk). I also included a…
A belt cover plate for the Pfaff 260.
Cup holder for my lawn chairs with 26mm tubing Category: Outdoor & Garden
This model is compatible with the lego system.
Mopar 3726 768 (#3726768), Stub-frame isolator bushing for Chrysler/Plymouth/Dodge C-body 1974-78. Car was completely missing one piece out of 4 so I tried 3D-printing. Aftermarket parts not available. Original designer: Chrysler…
I remodeled the original plunger rod, to solve catching issues with my K26 spring. It has a slightly bigger notch.
To keep my keys and padlocks apart, I created these sleeves for the key and corresponding padlock. This one fits the Three Circles 264 padlock. Best results are obtained when printing the key sleeve upright and using supports for the…
One wall on first layer, enable support, easy print Holes for 5x3 magnets and self-tapping screws for fan mount (07/02/2025 New toolhead designs uploaded) (05/02/2026 New toolhead designs uploaded) (05/05/2026 New toolhead designs…
Now With Assembly Instructions! Oliver 2655 4WD - 1:16th Scale Uses M2 and M4 screws Uses two 6.4mm diameter x 178mm (1/4in diameter x 7in) rod for axles Parts that need M2 and M4 holes drilled have indents.
I added this in 1 of the 6 panel windows for granddaughter gifts, the others were 2 color snow flakes. Another panel with just the tree for your own text Thanks to invader for the awesome Christmas tree file !…
Volvo XC90 Folding Folding Seat Latch Release Handle (Rear, Interior code: RXXX, RXXX). Volvo original PNs: 39826799 ; 39826801 Two files, with and without Volvo logo available. If printed in high strength material (PETG, PCTG, PCCF etc),…
The Geiger Counter as announced in Make Magazin (Germany) 3/22 (Page 8) is a great pice of work. Our Geiger Counter runs non-stop for more than one year now with ESP8266 (D1 Mini Board), running ESPhome under Home Assistant. Original…
This is an adapter to put a 60mm Pocketbike Airfilter onto an Honda Rebel 125 carburetor. Category: Automotive
New Year's gnome 2026 to stand and hang! I used the standard PrusaSlicer parameters for PLA. Slow printing improves the print quality! Print: Nozzle: 0.4mm Layer height: 0.2 Infill: 100% I used PLA for printing, PETG is also good.…
Upper and lower fan wheel part separated, so printing won't warp the total, glue together to form one part
This is just the outer shell of the money/gift certificate holder updated with the correct years. I printed it in PLA but most any filament will work. I like using a sharpie to make marks where the nubs are on the different parts of the…
no support needed battery connecting boxes check on: https://www.printables.com/model/1119580-26650-battery-connecting-box
Replacement for the original cover with the hole for installing the light in the rear seats and do not destroy the original. Updated(30/03/2026) Added Step Files For great finish you can print in resin. Also by mixing resin you can get…
Czech geocoin: Here Universal Geocoin 2026: Here Universal Geocoin: Here
Improve your wireless phone charging experience in your US 2023-2026 VW ID.4! Features Improves charging efficiency and reduces heat thanks to magnets perfectly aline your MagSafe or Qi2 compatible phone with the wireless charging coil.…
This is a case for the ESP8266 ESP-01-based DHT11 module available via various sellers. For example, here is one that has the module and the ESP-01 as a combo. I have noticed that the temperature readings of these devices tend skew high…
Soldering iron mount for the Minimalistic Heat insert press that can hold a parkside PLS 48 D2 soldering iron or others with 26 mm diameter.
I purchased a LoRa module from Amazon to get started learning about Meshtastic, and I realized after receiving it that I needed an enclosure for it. I didn't realize how easy it would be to set up. I would assume if you're here you…
I have been FDM printing mini's for a decade. I am publishing my latest settings. These are for MK4 but the settings should apply to any other printer. Updated June 2026: I made some changes as well as argued with AI for further insights.…
Requirements: 2x countersunk M2 bolts (hex or torx head recommended for style) 2x hot melt M2 inserts Printing notes No supports needed Scale the colon part in Y dimension in your slicer to fit your particular indadescent bulb.
This is a remix of https://www.printables.com/model/257971-gridfinity-es126-holder. He made a perfect fit for the ES126 so i just added the bit set box as i want to be able to bring it with me when needed.
This is my first model of a Naval Canon made in and around thw 18th Century. I used reference images in order to make this, and this is my first attempt at doing so in Blender. I would have liked to put wooden textures on to the frames,…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
![Dead man's security [Grillo G126D tractor]](https://media.printables.com/media/prints/63286/images/659756_0b2d3892-2bcb-44b5-9f7b-5df576904986/securite_homme_mort_img4.jpg)
![Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19]](https://media.printables.com/media/prints/35720/images/1199286_159f781c-d9e2-4896-be13-5668e22d36a3/eatxv3.jpg)
