1 / 4
Base for vintage flat bed sewing machine (designed for Pfaff 260 series)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This base enables to use the sewing machine outside a sewing table (how it would have been sold in the past)
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
I created a base for a vintage sewing machine (designed for a Pfaff 262) so that I can put the flat bed sewing machine on my desk.
This is a very improvised design, not a lot of though went into it.
Materials required:
- Silicone pads for the bottom, so that it doesn't move around
- Super glue to join both parts
- Tape (optional, I taped the seam between the 2 parts in case some excess oil from the machine leaks, I don't want any oil to reach my desk)
Take into consideration:
- This was a very fast design and was designed around my machine, so it may not fit yours. I have heard they are universal but I am not sure to what extent that is the case.
- Note you must lift the whole machine and take it from here to change the lower bobbin. If you change the lower bobbin often, this base can be impractical
- The smaller dowels that connect the 2 pieces are fragile, beware when manipulating
If I would re-design it I would fix the following:
- The side handles do require supports otherwise the overhang will sag a lot
- On my printer, the corners curled up so I recommend a strong brim around
Hope you find it useful, or remix it to a more refined design.