Naval Canon 26 LB _18th Century
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Model made in Blender of an old Naval Canon from around the 18th Century
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my first model of a Naval Canon made in and around thw 18th Century. I used reference images in order to make this, and this is my first attempt at doing so in Blender. I would have liked to put wooden textures on to the frames, but don't know how to do that yet. If anyone has some good tutorials demonstrating this in Blender I would love to know.
The barrel halves are glued together. The wheels (trucks) should slide on and the axles and the small wedges used to keep them in place. Its axles should click into place but you may have to remove some material or glue them in place. I was able to push them in nice and tight. There is a hole in the rear axle where you put in the saddle (please see images for assistance here), this will probably need gluing in. There are two shackles for attaching the barrel to the frame, one for the left and one for the right. The barrel should rotate up and down and not be glued in so be careful not to stick it in place.
I hope you get as much fun out of this as I did modelling it in Blender?