110 models
I purchased the tool for my xLDC Quick Release to make it easier to crimp the ribbon cables. This is because more connectors have to be crimped with the xLCD than with the quick release of the MK3S+. You need a quick release if you want…
Some time ago I printed a box for crimping tool and ferrules - functional, but rather simple. However, I wanted something more stable and so I turned the idea into a case based on the Frog Box v2.0 . The box has a compartment for the…
This is a portable pinch and crimp block which can be used with up to 9mm rope, the original is made out of wood and i copied the design which can be 3d printed. I would highly recommend to sand all the surfaces for better grip, i…
A Sewing Crimping Clip , commonly referred to as a seam pressing clip, is a specialized tool designed for sewers and tailors to hold fabric edges together temporarily without piercing them, unlike pins. These clips are particularly useful…
The STLs are in the intended printing orientation. The step files are not likely to be. No supports needed. One or more copies of the “insert” will need to be printed for each mount. Recommend PETG for the insert, and absolutely whatever…
Hello! Forgot to add the boot/cap/cover to your RJ-45 cable and you crimped it already? been there, done that. Hope this helps. This is a work in progress (W.I.P.) as it's not the easiest print using FDM printers, yet. Update 2022-09-07…
This is a remix of sndstrm's Sortimo L-Boxx Mini Insert for the PR-3254 Crimping Tool I'm using. The two trays come as a set since the upper Tray has a height of 25mm and the lower one 15.5mm to fit the overall height. If you want a…
Crimping plier holder for IKEA SKADIS pegboards specifically tailored to fit the IWISS SN-2549 ratcheting crimping pliers. Two versions are included: Plier holder with three slots to hold spare/different crimping jaws. One of the slots is…
Gridfinity compliant, low-profile tray/holder for the IWISS/iCrimp HSC8 ferrule crimping tool. The one show in the picture is a knock-off brand but it has the same physical size as the original. Please note that some brands of HSC8 type…
Gridfinity bin for the IWISS HSC8 family crimping tools. Size is 5 x 2 units and 4 units high. IWISS makes crimping tools HSC8 6-4 HSC8 6-6 HSC8 16-4 HSC8 16-6 of the same form factor, they should all fit (not tested though). I included a…
Use the M4 insert form HSW and a M4x30 swrew *Update 2024.02.29* Adding a model with hex insert after request- Not tested - please feedback
Crimping plier holder for IKEA SKADIS or UPPSPEL pegboards specifically designed to fit the IWISS IWS-3220M ratcheting crimping pliers. I printed in Black PLA with 35% infill on a Bambu P1S, (tree) supports on, came out plenty strong. I…
If you print the 3/8 height box make sure you print the 1/8 height lid so that the pair is ½ height and easily stackable.
You may be pissed when you have all the (expensive) tools and don't have them by hand when you need them. So I took Whity's Rugged Box. Brought it to my best fit (F3D parametric). Made an insert blister with individual distancers for each…
Holder using t-nuts for larger plier-ish tools, like crimping tools and wire stripper tools. Single T-nut attachment each.
3x6 Gridfinity holder for the Parkside crimping tool. Tool fits almost perfectly with a little bit of room. Model was to big for my printer so i had to split it in two parts.
Used 2 m3x40 screws. printed with: 0.6mm nozzle. 0.3mm layer height. 4top/bottom layers. Esun ESilk Pla.
RJ45 crimping tool mount
Gridfinity compliant, low-profile tray/holder for the genuine Japanese Engineer PA-09 open barrel terminal crimping tool. Printed in PLA with a 0.4mm nozzle and 0.2mm layer height. Please note that the original Taiwan knockoff PA-09's…
This Frog Box was resized to allow me to put my crimping tools in. I've got two associated trays here on printables as well. The interior of the box is 250w x 140d x 46 x mm. Printed with PLA 30% cubic subdivision infill, 5 top/bottom…
Gridfinity holder for SN-01BM crimping tool. Other similar tools may fit. The bin was generated with FusionGridfinityGenerator . Takes a 5x2 space and 4 height units. It's built to be stackable and has holes for magnets.
Gridfinity bin for the IWISS SN-28B crimping tool. Size is 5 x 2 units and 4 units high. IWISS makes other crimping tools SN-01BM SN-025 SN-48B SN-58B SN-2546B SN-2549 of the same form factor, they should also fit (not tested though). I…
Gridfinity compliant, low-profile tray/holder for the IWISS IWS-2820M and the IWS-2412M open barrel terminal crimping tool. I did not completely design it from scratch. I used schenklooza 's excellent Gridfinity Parametric Blank bin as a…
Remix of " Gridfinity Parkside crimping tool 3x6 " by xAqua I appriciate the great work of xAqua. I just added several compartments to the original model for storing little things, to improve the usage of space. If you preffer to display…
This is a storage case for the interchangeable dies of a crimping tool. It prints in one piece with no supports required. After printing, the hinges may be slightly tight at first, but they loosen up and move smoothly after a few…
This is a simple loop to hold the PA-09 Crimper in a nice, easy to grab position without taking much space on the storage wall itself. the Hex is meant to be press fitted into the hollow inserts found in the Files of the awesome Honeycomb…
This is a remix to fit the IWISS IWS-3220M, the model was mirrored, and a notch was added to to hold the ratchet release level in order to securely hold the tool. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
This is a two bin cutout for the Klein ferrule crimping tool. It fits the thin profile Milwaukee Packout organizers. It will go in three different positions in a thin organizer. I made this using Zyltech red PETG, which seems to match the…
Use the same Print settings from the original or remix.
A multiboard holder for Parkside crimping pliers
Remix to fix inconsistent face
This Gridfinity-compatible holder is designed for the DN-28B / SN-28B crimping tool , commonly used for crimping terminals in electrical and automotive applications. The holder features support specifically for the tool jaws , helping to…
Crimping Tool Mountfor Ikea Skadis pegboard using the universal skadis hook. Shoud fit every crimping tool with handle size max. 20x63mm You'll need two skadis hooks - https://www.printables.com/de/model/323748-skadis-universal-hook
knipex 9721215 crimping pliers hsw
Use the Skadis T-Nuts and some M2 screws for mounting You also need 2x 6x3 magnets and some glue
This was custom fit for IWISS SN-2549, but once lots of Crimping tools are similar, may fit another brands and models. It's a tight fit, so if your printer needs more hole tolerances, you can increase it in your slicer with a value from…
Simple sliding-lid tool box for an HS-type crimping tool with 3 sets of dies: One in the tool, two more in the box. The crimping tool is sold under different names, such as HS-03B, HS-05D, HS-30J or Klein Tools 3005CR. The lids is held…
Remix of previous ferrule crimping tool gridfinity bin
Gridfinity holder for SN-01BM Crimping Tool Printed in PETG, but PLA should be fine. Text can be painted in the slicer if you have a multi color or material printer, or could be painted after printing.
This is a remix of Animated Design Studios Gridfinity toolholder for RJ45 crimping tools. I modified the design to fit a wider variety of tool shapes by removing the center block that divided the handle from the main body of the tool. I…
This is a Gridfinity-compatible holder specifically designed for the HSC8 6-6A crimping tool. The download includes two versions: One with an ejection hole at the bottom for easier tool removal. One without the ejection hole , for a…
Simple “hook” for crimping pliers or any other tool with a massive handle (fit proskit CP-3005 or similar) You can also store interchangeable dies in sockets (suitable for dies of shape bellow) My setup produces a decent press fit…
Gridfinity stackable bins to store jaws from a generic crimping tool from aliexpress. Tool: https://www.aliexpress.com/item/1005005790548222.html?spm=a2g0o.order_list.order_list_main.5.1f4618021R0cND Sources:…
Gridfinity compliant, low-profile tray/holder for the Taiwan knockoff Engineer PA-09 open barrel terminal crimping tool. Printed in PLA with a 0.4mm nozzle and 0.2mm layer height. Please note that the original Japanese PA-09's will not…
Quick and dirty remix of Ibot_3d's PA-09 holder with two regular snaps added to the rear. Printed snaps down with regular supports. The fitment of the pliers is not perfect but it holds them on the wall and looks nice.
Update 18.09.25 - Made small tweaks on model First slot is marked and used for Ferules jaws. Slightly increased slot size so you can insert all jaws from both sides (last paragraph does not apply anymore) Simple wall holder for crimping…
Ratcheting crimping plier + spare jaw (IWISS SN) holder for honeycomb storage wall (HWS)
The last bit of toothpaste is difficult to extrude when most of the tube has been used. It squirts to the bottom of the tube and you have to work it back up to the nozzle again before you can brush your teeth. These crimping rollers…
Printed in FilamentPM Graphite Black. Use Organic Supports (Prusa Slicer) on the printbed only. If you like you can add infill-modifiers to the skadis-hooks, as they sometimes are hard to get into the board and break in the process…
The trays were designed to fit into a customized Frog Box. While the FrogBox is fine ( see it here ), I do intend to modify these models to fit into the T-Stak toolbox I keep my electronics tools in. But the trays are designed to be…
HSW Engineer PA-09 crimping tool
I designed this model to organize my many rolls of connector pins, and I'm quite satisfied with the design so i thought I would share it so everyone can have it. Recommended filament: PETG, or anything with better layer adhesion To…
These are alternative inserts for the original box. They designed to fit this crimping tool: https://www.aliexpress.com/item/1005005790548222.html Unlike original ones, these need to be printed from a hard filament. I used PETG. I added a…
Gridfinity bin for Knipex Crimping Pliers 97 22 240
how it works: Unfortunately, some processing is required. tool https://www.aliexpress.com/item/1005003749735889.html spring https://www.aliexpress.com/item/1005001408323096.html - wire 0.4mm / outer 5mm / length 15mm 3d models M3 20mm…
Knipex 97 21 215 B 9" Crimping Pliers Gridfinity Bin 2x6. Not perfect but it works.
Box designed to hold dies up to 19mm wide and up to 38mm (shorter row) and 50mm (longer row). It holds my widest die (insulated flags die 9PK-3003D42) and as well the longest one (9PK-3003D27). I am including my Fusion f3d file that could…
As none of the models I found really fit the ferrule crimping tool, I made a quick model to match the space of its grip. Print orientation shown in the second picture - I used tree support for the upper hook. Mine was printed in PLA as it…
As I love these Japanese tools I wanted to give them a nice place for sstorage. And I have both tools (which I usually use together) in one place. Designed in TinkerCad. Neodym magnets hold the box closed. More Neodym magnets hold the…
I modelled this Powerpole terminal blade receptacle to replace the one that comes with the original Eclipse Tools Powerpole crimping die set (the black plastic part) mainly because I was not satisfied with it. I wanted a part that can…
Use the Skadis T-Nuts and some M2 screws for mounting You also need 1x 6x3 magnet and some glue
3 by 4 gridfinity bowl for Knipex 975309 Crimping Pliers
Gridfinity compliant, low-profile tray/holder for the highly versatile Ergo-Lunar crimping tool with interchangeable crimping dies. https://eclipsetools.com/default/300-108.html I did not completely design it from scratch. I used…
Hello, Here's a replacement part for the 63827-1475 locator assembly of the 63827-1400 Molex hand crimp tool. Due to a drop, the grey plastic part from the locator assembly was deformed, thus resulting in the assembly not supporting the…
Made this for a friend to look like a gold bar. Normal version also included. It has Trapezoid shape to grab it from both sides and two holes for a rope to attach. Free my models 3d15a9f3587a
A gridfinity bin for the Knipex 975304 Ferrule Crimping Tool + some design files.
Print instructions Drop files into the slicer “UltiMaker Cura” will do Change nozzle size to 0.4mm on the printer Set infill density to 20 or 40% Change the print speed to around 70 to 80% Start print Take note that I am a novice to…
I needed something to hang my ferrule crimping tool as well as the JST crimper on. Coincidentally, both tools fit on there because they have very similarly shaped handles. Might look crude and I might slim it down a little going forward,…
Gridfinity tray for RJ45 Crimping Tool Gridfinity Dimension: 2 x 5 and 5 height
Držák pro krimpovací kleště na konektory na stěnu Mars. Tištěno na PETG vrstvou 0,3 mm a s poporami pod háčky (všude).
This remix modifies the original Skadis Universal Peg design to use a single slot on the Skadis pegboard, maximizing your board's capacity. Additionally, it includes a custom hook designed specifically to hold Connection Crimping Pliers…
SN-01BM crimping tool storage tray
Gridfinity-compatible holder for terminal ferrule crimping pliers, keeping the tool secure and organized.
Print upside down! - the triangular part has built-in surfaces for support. You can go to your slicer and paint supports onto these parts. They will break off easily after printing. Note: You will need one M2.5 Skadis T-Nuts by @6d6178…
This is a recreation and remix based heavily on Spookniks tool holder for Knipex crimping pliers for IKEA Skådis (or Skadis for those not writing with the diacritic ring). The original only had room for one tool and it felt a bit sloppy…
A crimping pliers holder for the Ikea Skadis pegboard. Six of the interchangeable jaws fit into the front compartments.
I started revamping my electronics workspace, so I wanted to organize and have holders for my crimping tools. If you happen to have the exact same set of tools, you can print the one piece holder. But given that this would be rare, I have…
This Gridfinity-compatible ferrule crimping tool holder is an improved remix designed for universal ferrule fit, stability, and usability in workshop drawer organization. Based on an existing Printables model, this version refines the…
I bought a crimping plier SN-58B and a jaw SN-2549 , but I found SN-2549 width 4mm and SN-58B width 6mm, so I create this 4mm to 6mm jaw adapter.
HT1P205 HÖGERT holder Crimping pliers
This Someline kit doesn't include a contoured pocket for the crimping tool. It was held in place with a few pieces of foam which were annoying to put back in place whenever I removed the tool. This insert fits the large case with the…
Organizing my toolbox and testing out a new bit of software. I designed this with tooltrace. added a pause to swap out the colour for the top boarder. All my colour changing is done manually. https://www.tooltrace.ai/ I used PETG but PLA…
Gridfinity Storage for SN-58B Crimping Pliers & Die Set Keep your SN-58B crimping tool and its interchangeable dies organized and always within reach on your Gridfinity workbench. WHAT'S INCLUDED Pliers tray: a custom-fit slot that holds…
I made this holder exclusively for my crimping tool. Please use the following model "hook one row" for the hook. 私が所有している圧着工具専用のホルダーを作ってみました。フックは以下のモデルの「hook one row」を使って下さい。…
Cartridge for crimping pliers ProsKit CP-371 and accessories. PLA, PET-G Nozzle – HF 0.4 Layer - 0.2 Fill 15% Perimeters 2< Brim
I print without every other leg to save on filament. It prints without support. step file has all the legs.
Gridfinity shadowbox for the Paladin style EZ-RJ PRO-HD style passthrough crimpers.
Uses 8 round magnets, size 6x2mm. Designed in Fusion360, file attached.
Remixed Maksym's box to have two short rows to hold the dies that I use with the Ideal Crimpmaster. Box will handle short dies from most manufacturers as well as most short clone dies. Used 4-40x 1-1/4 inch screws. Used PETG for the box…
It needs no supports, prints pretty fast and doesn't use much material. It relies on an empty insert to be fitted in pretty tightly. In case a less tight fit is needed let me know
The standard IDC ribbon cable crimping tool/press can be acquired from many places for quite cheap. It works well, but its clunky and really not that well optimized for one hand operation. This conversion allows to incorporate a…
Thomas & Betts Sta-Kon WT111M Crimping Gridfinity bin 2x7. It's cut in half and connected with a dovetail. Open rectangle at the top for whatever else. Not perfect but it works.
storage for your crimping pliers.
It is a very tight fit, use at your own risk. I recommend heating up any parts that are tight and pressing the tool into it to shape the holder to your tool.
I use small Drill Press Vises to join it...
I got these cheap crimpers on Amazon for a good deal, but couldn't find an existing gridfinity storage solution as they are slightly different than others I have found.
