Universal Filament Drybox with Tush++ remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix from Thingiverse to add clearance for m3 bolt heads and to add bolt holes for the bearing mounts.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 89
- Wydruki
- 2
- Wyświetlenia
- 1084
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Remix of the excellent Universal Filament Drybox with Tush++ from kageiit on Thingiverse.
https://www.thingiverse.com/thing:5138492
- Fits most manufacturer's single 1Kg spools or smaller spools using the adjustable base
- No supports needed
- Designed with quick changes of filament rolls in mind without having to fidget with complicated spool holders and adapters
- Specific 4L cereal container required with this design- see below
- Provides buttery smooth motion thanks to the TUSH design
- Plenty of space for silica beads under the base piece.
- Room for a humidity indicator attached to the base.
Modification from Original
- I added notches on the TUSH++ rails so the rail mounting bolts would not cause the TUSH++ rail to sit crooked.
- Also added bolt holes for m3 bolts at the bearing mounts for additional rigidity if desired.
- Original TUSH++ rail STL file included for reference
Items needed:
Cereal Storage Container: https://www.amazon.com/gp/product/B08PZ4R3H8
PC4 M10 Fitting: https://www.amazon.com/gp/product/B07ZCNB1L8
4 x M3x12mm Screws and Nuts: https://www.amazon.com/gp/product/B076J3W7R4
4 x 608zz Bearings: https://www.amazon.com/gp/product/B07R7PR72H
Printed Parts:
- 1 x base
- 2 x TUSH_rail
- 4 x TUSH++ or TUSH++ Bolt Mod
NOTE: You may need to drill the bolt holes out with a 3mm or equivalent drill bit for the bolts to fit.