1 / 2
Festool Track Saw Kerf Jig for TS75, TS55 and TSC 55K — zdjęcie 1
1 / 2

Festool Track Saw Kerf Jig for TS75, TS55 and TSC 55K

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Jig to help align the track to leave the exact amount of spacing for the kerf of the blade for right side cuts.

Ocena
4,857 / 5
Polubienia
102
Pobrania
571
Wydruki
9
Wyświetlenia
4046
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This jig is to help align the track to leave the exact amount of spacing for the kerf of the blade. This is used if the waste board is to the left of the track and what you need is on the right. 

Festool saws have different widths so use the offset for the model below. This should be able to work on other track saws other then Festool if the blade kerf is the same. 

TS75 - 2.4mm

TS55 - 2.2mm

TSC55 - K 1.8 mm

Update: 02/02/22 - added reinforcements to the top and bottom marking area. 

Category: Tools

Tagi