1 / 2
Curtain Rod Bracket with wood dowl as a rod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was a Curtain rod holder bracket I designed to be used with a wood dowel. The hole for the dowel is exactly…
- Ocena
- 4 / 5
- Polubienia
- 115
- Pobrania
- 443
- Wydruki
- 3
- Wyświetlenia
- 1733
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (156)Powiązane
This was a Curtain rod holder bracket I designed to be used with a wood dowel. The hole for the dowel is exactly 33.5mm Diameter. Roughly 1 5/8th inches. I advise printing out the piece and bringing it to your hardware store to find the right dowel. The design also has the ability to put in a M3 hex and bolt to tighten down a loose dowel.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
200
Infill:
20
Filament:
prusament PLA, PETG Galaxy black
Category: Decor