Stackable Shoe Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Download link is broken and thingiverse is not fixing it. To download, go below the thumbnails there is the section…
- Ocena
- 5 / 5
- Polubienia
- 697
- Pobrania
- 1828
- Wydruki
- 8
- Wyświetlenia
- 10 589
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Download link is broken and thingiverse is not fixing it. To download, go below the thumbnails there is the section "thing files". Click on that and download the STL there.
Hi Everyone, This is a shoe rack design based off of my Monitor stand. This can be printed on a Prusa Mk3 Bed dimensions. You will need to print with no top and bottom layers. The pictured infill is 5% honeycomb with 9 perimeter layers.
For the piece of wood. You can use any 3/4 thick wood, plywood,mdf, laminate etc. The depth is 8 inches and the length is however long you would like.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.2
Infill:
5%
Filament:
prusament PETG or PLA Galaxy Black
Category: Household