1 / 4
Monitor stand Legs — zdjęcie 1
1 / 4

Monitor stand Legs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are legs I created to use with a piece of wood to create a stand for your monitor. You will need 3/4 wood at 8…

Ocena
4,941 / 5
Polubienia
840
Pobrania
2466
Wydruki
19
Wyświetlenia
14 645
Oceny
17

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These are legs I created to use with a piece of wood to create a stand for your monitor. You will need 3/4 wood at 8 inches deep to friction fit into the slot. The length is up to you I suggest if you use it longer use more legs to counter any bowing. You just need to slide the piece further into the middle where you need support. The design inside is based on your infill pattern. I used a honeycomb with no top and bottom layers. You want your thickness of walls set to 9.

Pictured is honeycomb at 6% infill and no rotation on the pattern. You can have fun with trying gyroid triangles etc.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

6


Filament:

prusament PETG galaxy black

Category: Office

Tagi