1 / 4
Monitor stand Legs — image 1
1 / 4

Monitor stand Legs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are legs I created to use with a piece of wood to create a stand for your monitor. You will need 3/4 wood at 8…

Rating
4.941 / 5
Likes
840
Downloads
2,466
Makes
19
Views
14,645
Reviews
17

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

These are legs I created to use with a piece of wood to create a stand for your monitor. You will need 3/4 wood at 8 inches deep to friction fit into the slot. The length is up to you I suggest if you use it longer use more legs to counter any bowing. You just need to slide the piece further into the middle where you need support. The design inside is based on your infill pattern. I used a honeycomb with no top and bottom layers. You want your thickness of walls set to 9.

Pictured is honeycomb at 6% infill and no rotation on the pattern. You can have fun with trying gyroid triangles etc.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

6


Filament:

prusament PETG galaxy black

Category: Office

Tags