G3/4 thread to Gardena Microdrip Adapter (G3/4 Gewindeanschluss für Gardena Microdrip)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for connecting the 4.6 mm tube of the Gardena Microdrip system with any G3/4 thread.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 300
- Wydruki
- 5
- Wyświetlenia
- 1409
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapter for connecting the 4.6 mm tube of the Gardena Microdrip system with any G3/4 thread, for instance a magnetic valve or the water faucet. Additionally, you will need a G3/4 sealing to make the connection water-tight.
Please note that the hole of the connector for the hose is no through hole. This is to enable printing the piece without support structures. You still have to drill the hole all the way through. I recommend a 3 mm drill bit.
Please be aware that at too high water pressure the water might find its way through the different layers of plastic and the adapter might leak. You could try out different infill ratios to make it completely tight. Alternatively, you could perhaps cover it with a thin layer of super glue.
The CAD model is available in the files section, so that you can adjust the model to your needs.
Feedback
Feedback? Ideas for improvements? Please leave a comment.