1 / 1
Syringe holder with IV pole clamp and needle holder — zdjęcie 1

Syringe holder with IV pole clamp and needle holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This holder clamps onto a 20mm diameter IV pole and holds two syringes and a needle in its packaging.

Ocena
0 / 5
Polubienia
13
Pobrania
28
Wydruki
0
Wyświetlenia
284
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Medical Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a syringe holder clamps onto an IV pole. It's designed for 20mm diameter IV poles and holds two 10mm diameter syringes and a needle in its packaging (shown in an 18Gx1").

The clamp requires a M3x30 socket head screw and a DIN 562 square thin nut (M3 5.4mm x 1.8mm).

Printing instructions
  • The orientation of the .stl file has the nut inserting from the top, screw clamp at the front, and syringes to the left.
  • You can flip the model horizontally or vertically to suit your preference.
Assembly instructions - Nut insertion
  • Gently insert the nut into the rectangular opening on the larger body side of the tube clamp.
  • You can use a M3 screw to push it all the way in (it's going to stop halfway).
  • You can push it out by inserting an M3 screw from the other end.
  • Optionally, you can add a dab of glue after the nut is inserted (from the insertion end) to secure it in place permanently.
Assembly instructions - Clamping
  • Place the clamp around the IV pole.
  • Insert the M3 screw from the side.
  • Tighten the clamp until it doesn't move.
  • Optionally, use some Transpore tape (adhesive side on the printed object) along the inside where the pole will go, to add some grip.
Notes
  • If you'd like any changes (e.g., syringe diameter, etc.), please message me and I'll see what I can do.

Tagi