Mount for water faucet / tap for a van table + optional sink mount

This is a mount I made to attach a battery-operatored tap and a detachable sink to the table in my camper van. It is made to fit a table of 2.8 cm thickness, but below I have attached a link to the Onshape project so the files can be modified to fit a table of another thickness.

The mount contains an internal, hidden duct to route the water supply tube around the table without drilling. The whole thing is attached beneath the table with two screws so that there will be holes in the top surface of the table.

The mount is designed for this type of tap:
https://www.amazon.it/-/en/dp/B08GYMZLB5?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

I used this collapsible plastic bin as a sink, and the attachment is made to easily attach and detach to this:
https://www.bricocenter.it/prodotti/default/470004985-pattumiera-da-esterno-pieghevole-6-lt.html 

The tap mount is printed in two pieces connected by two 4x20mm screws which screw into 7mm nuts. This ensures that the whole thing prints without support. I printed in PETG to withstand hot Italian summers.

The sink mount is connected to the rest of the assembly with two 4x20 mm screws which screw into a pair of 7mm nuts, so it is easy to swap it for an alternative mount of your own design or to simply leave out.

I have included both .stl and .step files here, and this is the link to the Onshape project:
https://cad.onshape.com/documents/7e1b658ce33f894d8fb7deb7/w/fc828878f7c1c62bbc581c8f/e/1b648249e0f709b4e06d494a

If you use the Onshape link, then please leave a make here so I know my work was useful to someone :)