Bosch POF 1400 AOE Round Base Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Round base for the Bosch POF 1400 AOE Router.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TLDR: Round router base for the Bosch POF 1400 AOE to always keep the same distance when routing along an outside support, regardless of the routers positioning.
I made this base, as the original one has a flat part at the bottom. Whenever you are running the router on the inside of a template, there is the chance to miss the spot and waste all the effort at once. This base fixes that.
After several iterations, it seams that an 8mm PLA is a pretty decent option for this to build. I used 20% infill.
The following models are included in addition to the round base plate:
- slide, to route straight dados into beafier oak bars. The slide has an uncentered distance of 42.4mm and 38.4mm to the plate center.
- round template with 40mm distance to center
Please let me know if you like the model, or would prefer to get some different dimensions.
