1 / 4
Handles for 3D printable rack — zdjęcie 1
1 / 4

Handles for 3D printable rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A couple of handles for the 3D printable rack system.

Ocena
4,667 / 5
Polubienia
44
Pobrania
665
Wydruki
4
Wyświetlenia
1324
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A couple of handles for the 3D printable rack system. It comes in 150mm and 200mm length.

This model is part of a series of accessories for my 3D printable rack system. You can check the other models here:

Do you like my models? Consider buying me a coffee ;)

Updates

  • 01 July 2025: I've added a 250mm long variant for the handles.

Required parts

  • 2x M5x20mm per handle.
  • 4x M5x20mm per “X2” handle.

Assembly instructions

To install the handle, align it with both rails, and insert the M5 screws until it's fully inserted.

Print Settings

Rafts:

Doesn't Matter.

Supports:

No.

Walls/Perimeters:

At least 3.

Resolution:

0.2 or 0.24

Infill:

25% or more

Filament:

PLA/PLA+/PETG/ABS/ASA/Nylon

Tagi