1 / 4
Handles for 3D printable rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A couple of handles for the 3D printable rack system.
- Rating
- 4.667 / 5
- Likes
- 44
- Downloads
- 666
- Makes
- 4
- Views
- 1,330
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A couple of handles for the 3D printable rack system. It comes in 150mm and 200mm length.
This model is part of a series of accessories for my 3D printable rack system. You can check the other models here:
Do you like my models? Consider buying me a coffee ;)
Updates
- 01 July 2025: I've added a 250mm long variant for the handles.
Required parts
- 2x M5x20mm per handle.
- 4x M5x20mm per “X2” handle.
Assembly instructions
To install the handle, align it with both rails, and insert the M5 screws until it's fully inserted.
Print Settings
Rafts:
Doesn't Matter.
Supports:
No.
Walls/Perimeters:
At least 3.
Resolution:
0.2 or 0.24
Infill:
25% or more
Filament:
PLA/PLA+/PETG/ABS/ASA/Nylon
