1 / 3
Raspberry Pi 2B/3B/4B/5B 6-inch Rack Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 6-inch Rack Mount for the Raspberry Pi 2B, 3B, 4B, and 5B.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 340
- Wydruki
- 2
- Wyświetlenia
- 1418
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (3)Kolekcje (78)Powiązane
A 6-inch Rack Mount for the Raspberry Pi 2B, 3B, 4B, and 5B.
This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here.
Do you like my models? Consider buying me a coffee ;)
Updates
- 02 August 2025: I've included the version 1.2 of this model, with the following modifications:
- Added a cutout to make it easier to insert and remove the micro SD card from the Pi.
- Added a non thread insert variant of the model.
- Added mounting holes all the way to the back, so you can also mount hats that require screws coming from below.
Required parts
- (Optional) 4x M2.5 thread inserts.
- 4x M2.5 screws.
Assembly instructions
- Insert the 4x M2.5 thread inserts into the mount.
- Insert your Raspberry Pi into the mount.
- Secure it with 4x M2.5 screws.
Print Settings
Rafts:
Doesn't Matter.
Supports:
No.
Resolution:
0.2 or 0.24
Walls/Perimeters:
At least 3.
Infill:
20% or more.
Filament:
Any.